User's Manual

User’s Manual 4-7
Operating Basics
Using the software
If you need to restart the web camera software, go to Start J All
Programs J TOSHIBA Utilities J Web Camera Application.
1. Photo/ Video
2. Settings
Figure 4-3 Using the Software
Using the microphone
You can use the built-in or an external microphone that connects to the
microphone jack to record monaural sounds into your applications. It can
also be used to issue voice commands to applications that support such
functions.(Built-in microphone is provided with some models) Since your
computer has a microphone and speaker, “feedback” may be heard under
certain conditions. Feedback occurs when sound from the speaker is
picked up in the microphone and amplified back to the speaker, which
amplifies it again to the microphone.
This feedback occurs repeatedly and causes a very loud, high-pitched
noise. It is a common phenomenon that occurs in any sound system when
the microphone input is output to the speaker (throughput) and the speaker
volume is too loud or too close to the microphone. You can control
throughput by adjusting the volume of your speaker or through the Mute
function in the Master Volume panel. Refer to your Windows documentation
for details on using the Master Volume panel.
Photo/ Video
Settings
1
2