User's Manual

Placing the printer Setting up your printer
6
` Placing the
printer
Place the printer on a solid, flat, surface, ensuring that the printer is positioned
in such a way that it can not topple, and that there is easy access to the control
panel and paper input devices.
Also ensure that there is enough space for sufficient ventilation and for the
printed output.
When selecting the printer location, observe the following additional
instructions:
Never place the printer in the vicinity of inflammable gas or explosive
substances.
 Do not expose the printer to direct sunlight. If you cannot avoid placing
the printer near a window, protect it from the sunlight with a curtain.
 When connecting a computer to the printer, make sure not to exceed the
maximum cable length (see User guide on the Online CD-ROM, Technical
Specifications).
 Ensure sufficient distance between the printer and any heating devices/
radiators.
 Avoid exposing the printer to extreme temperature or air humidity fluctu-
ations. Above all take care to avoid the influence of dust.
 It is recommended to install the printer in a place which is acoustically
isolated from the workplace because of the noise it may produce.
STOP
QSG2440
_
en
_
396957
-.
book
Seite
6
Donnerstag
,
22
.
November
2007
11:31
11