User's Manual

Control panel keys Control panel
16
Print quality key The printer can print with different print qualities and fonts. The actual
selected print quality is displayed by its respective LED light.
If you want to change the print quality setting, press the PRINT QUALITY
key repeatedly until the desired print quality is set.
Print qualities
9 needle printer
The following print qualities/fonts are available:
13 PRINT + SHIFT Press this key combination to printout an overview of the
printer configuration.
14 TOF + SHIFT Press this key combination to adjust the position of the first
printing line. Refer to section “Setting the first printing line
(TOF)” on page 27.
1 The printer must be in Offline mode.
No. Key Function
HSD High Speed Draft: prints with the highest print speed (533 cps at 10 cpi)
but also lowest print quality.
Draft Prints with high print speed (400 cps at 10 cpi) but with lower resolution
as with Letter quality.
Courier Prints the Courier font in Near Letter Quality.
Quadrato Prints the Quadrato font in Near Letter Quality.
OCR-B Prints the OCR-B font in Near Letter Quality.
OCR-A Prints the OCR-A font in Near Letter Quality.
PRINT QUALITY
COURIER
OCR-B OCR-A
DRAFT
QUADRATO
HSD
QSG2440
_
en
_
396957
-.
book
Seite
16
Donnerstag
,
22
.
November
2007
11:31
11