User's Manual

Single sheets Paper handling
24
` Single sheets
1. Move the paper select lever back-
ward to Single Sheet position.
2. If necessary, readjust the Print
Gap lever for continuous forms
(see section “Print Gap Lever” on
page 20).
3. Make sure that the printer is
turned on.
4. Raise the single sheet feeder until
it locks into its mounting.
5. Align the left paper guide with
the mark on the left of the single
sheet feeder. Adjust the right
paper guide to the width of the
paper used.
QSG2440
_
en
_
396957
-.
book
Seite
24
Donnerstag
,
22
.
November
2007
11:31
11