User's Manual

Paper handling Setting the first printing line (TOF)
27
` Setting the first
printing line (TOF)
You can use the TOF function for setting the vertical position of the first
printing line.
To adjust the first printing line vertically, proceed as follows:
1. Either transport fanfold paper to the next top of form position or feed an
inserted single sheet by pressing the FF/LOAD key.
2. Make sure that the printer is in offline mode; press the SEL key, if
necessary.
3. Hold the SHIFT key depressed and use the Micro Feed Down or
Micro Feed Up keys to adjust the desired first printing line.
Each micro feed will feed the paper down or up in 1/180 inch incre-
ments.
4. After releasing the key, the new adjusted first printing line is saved.
A coloured line on the transparent
paper protective cover of the print-
head can be helpful if you want to
adjust the first printing line.
QSG2440
_
en
_
396957
-.
book
Seite
27
Donnerstag
,
22
.
November
2007
11:31
11