Operation Manual

239
11
5
Key in the Password (5 digits) of the
selected group, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip
this procedure and go to step 6.
6
Select the desired template.
- When the template button with the icon is pressed, the
operation of the registered setting functions is automatically
started.
7
Key in the Password (5 digits) of the
selected template, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip
this procedure and go to step 8.
8
Confirm that “Updated the template
setting” is displayed on the screen.
z Select other copy mode as required.
9
Press the [START] button.