Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX
14
GENERAL PRECAUTIONS (Cont.)
When using the multifunctional digital systems
Warning
• Do not place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the
multifunctional digital systems. And keep paper clips and staples away from the air vent. This could
cause a fire or give you an electric shock.
• If the multifunctional digital systems becomes excessively hot, smoke comes out of it or there is an odd
smell or noise, proceed as follows.
Turn the main switch OFF and remove the plug from the outlet, then contact your service representa-
tive.
• If the multifunctional digital systems will not be used for more than one month, remove the plug from
the outlet for safety purposes during that time.
This could cause a fire or give you an electric shock if an insulation failure occurs.
Caution
• Do not place heavy objects (4 kg or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
• Do not place heavy objects (4 kg or more) on the multifunctional digital systems. If the objects fall off,
this could cause injury.
• Do not remove or connect the plug with wet hands, as this could give you an electric shock.
• Do not touch the fuser unit and the metal area around it. Since they are very hot, you could be burned
or the shock could cause you to get your hand injured in the machine.
• Be careful not to let your fingers be caught when closing the drawer.
This could injure you.
• Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
• Do not touch the metal portion of the guide board in the automatic duplexer as it could burn you.