Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX
158
5.USING THE EDITING FUNCTIONS
5
15. BOOK - TABLET
When copying under the mode of 2-Sided Originals to 2-Sided-Copies, this function allows you to rotate
the back side of the original to be copied by 180º. It is useful when ‘open to left’ (Book) originals need to be
copied in ‘open to top’ (Tablet), and the opposite condition is available.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Perform the setting of [2 -> 2 DUPLEX].
P.103 “4.Duplex Copying”
4
Press the [EDIT] button to enter the edit menu, and then press the
[BOOK - TABLET] button.
• ‘Open to left’ originals are copied in ‘open to top’ and ‘open to top’ originals are copied in ‘open to left’ by this
operation.
• If the desired function button is not displayed, press the [Prev] or [Next] button to switch the menu.