Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX
169
5
6
Press the [ENTER] button.
• Select other copy modes as required.
7
Press the [START] button.
• Copying on the tab of tab paper is started.
Tab paper insertion
The blank tab paper is inserted prior to a selected page. Up to 50 sheets of tab paper can be inserted.
• Copying on the tab of the tab paper is not performed.
• Up to 15 pages are registered in the template. ( P.201)
1
Place tab paper in the drawer or on the bypass tray.
• For placing tab paper in the drawer, see P.164 “Setting tab paper in the drawer”.
• For placing tab paper on the bypass tray, see P.165 “Setting tab paper on the bypass tray”.
2
Place the original(s).
3
Press the [EDIT] button to enter the edit menu, and then press the
[TAB PAPER] button.
• If the desired function button is not displayed, press the [Prev] or [Next] button to switch the menu.