Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX
325
11
Images are stained
Images are blurred
Copy images are partially missing
Item to be checked Countermeasure Reference page
Is the Reversing Automatic Doc-
ument Feeder securely closed?
Close the cover or feeder prop-
erly to shut out any outer light.
P.57 “2.Setting Originals”
Are the platen sheet, original
cover and scanning area dirty?
Clean them up. P.322 “1.Daily Inspection”
Is the image density set prop-
erly?
Adjust the image density prop-
erly with the [AUTO] button or
manual density buttons.
P.112 “6.Copy Density Adjust-
ment”
Are 2-sided originals used? As the other side of the originals
can be seen, adjust the image
density properly (lighter) with
the background adjustment
function.
P.116 “1.Background Adjust-
ment”
Are originals with high transpar-
ency used?
Place a blank sheet of paper
with originals of the same size
or larger over the original.
P.60 “Sheet originals”
Item to be checked Countermeasure Reference page
Does the entire original lie prop-
erly on the surface of the glass?
Place the original on the glass,
and then close the Reversing
Automatic Document Feeder
firmly.
-
Is the paper moist? Replace it with new paper. -
Item to be checked Countermeasure Reference page
Are the original size, direction
and the reproduction ratio suit-
able for the paper size?
Select copy paper of the same
size as the original, or set the
reproduction ratio suitable for
the paper size.
P.78 “Automatic Paper Selec-
tion (APS)”, P.83 “2.Enlarge-
ment and Reduction Copying”
Is the margin on the copy set
properly?
Adjust the image shift value. P.120 “1.IMAGE SHIFT”