Operation Manual

46
1.BEFORE USING EQUIPMENT
4.Setting Copy Paper (Cont.)
1
Drawer for special uses
When you set paper for special uses other than normal copying (e.g. sheets for cover copying) in the
drawer, you need to set this drawer for the special use in advance. If the drawer has been set for a special
use, its indication will change on the touch panel. A drawer with this setting will not be used for normal
copying.
The following paper types are selectable according to each purpose.
Select the suitable paper type from the following according to its paper weight.
Paper type Purpose Indication Reference
Cover sheet Sheet used in the cover copying mode “COVER”  P.144 “9.COVER
SHEET”
Insertion
sheet
Sheet used in the sheet insertion mode
(Up to 2 drawers can be set for this mode.
First, set Insert source 1, then press the
drawer for the paper type of Insert source 2,
and then press the [INSERT] button.)
“INSERT 1”
(or “INSERT 2”)
 P.147 “10.SHEET
INSERTION”
Tab paper Paper used for the tab paper mode “TAB PAPER”  P.163 “17.TAB
PAPER”
FAX paper Paper to print data from the FAX Unit, Printer
Kit, Scanner Kit, Printer/Scanner Kit when
any of them is installed.
F (See the manual of
each option.)
Special paper Special types of paper
(e.g. Paper with a watermark)
-
Paper type Paper wight Indication Reference
Thick 1
- 105 g/m
2
 P.37 “Copy paper
types and sizes”
Thick 2
- 163 g/m
2
Thick 3
- 209 g/m
2
2
3