Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX
94
3.SETTING OF BASIC COPY MODES
3.Selecting Finishing Modes (Cont.)
3
Staple sort mode
When the Finisher or the Saddle Stitch Finisher (both optional) is installed, automatic stapling is enabled.
You can select the stapling position from three types.
• The paper weight applicable for this mode is 64 to 80 g/m
2
.
• Special paper such as OHP films or sticker label cannot be used for stapling.
• Copies in different size cannot be stapled.
When the lengths of the copies are the same, they can be stapled even if their sizes are different.
(Example of selecting the [FRONT STAPLE] button)
Setting the staple sort mode
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. ( P.69 “6.Bypass Copying”)
2
Place the original(s).
3
Press the finisher button on the basic menu.
AB
AB
AB