Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX

109
3
4
Select the book copying type.
• Press the [RIGHT -> RIGHT] button (= default setting at the installation) if copying should start at a right-hand
page and end at a right-hand page. Other copying types are selectable by pressing any of the [RIGHT ->
LEFT], [LEFT -> LEFT] and [LEFT -> RIGHT] buttons.
e.g.: If pages 2 to 6 of a book which opens to the left are to be copied, select [LEFT -> RIGHT].
• The yellow indicator line for booklet copying moves to the centre of the original glass.
5
Select A4 or B5 copy size.
• Only A4 or B5 size is available. Press the drawer button on the touch panel, or use the paper source selection
( / ) buttons to select A4 or B5 size.
• If you need a binding space, select the book margin mode. ( P.120 “1.IMAGE SHIFT”)
- Set other copy modes as required.
E
6
F
7
A
2
B
3










