Operation Manual
Table Of Contents
- CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO520/600/720/850
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. Description of Each Component
- 2. Turning Power On / Shutdown
- 3. Energy Saving Mode
- 4. Setting Copy Paper
- 2. HOW TO MAKE COPIES
- 3. SETTING OF BASIC COPY MODES
- 1. Paper Selection
- 2. Enlargement and Reduction Copying
- 3. Selecting Finishing Modes
- 4. Duplex Copying
- 5. Original Mode
- 6. Copy Density Adjustment
- 4. IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 6. e-FILING
- 7. TEMPLATE
- 8. JOB STATUS
- 9. BLINKING GRAPHIC SYMBOLS
- 10. WHEN THIS MESSAGE APPEARS
- 1. “Toner low”
- 2. “Check staple cartridge”
- 3. “Check staple cartridge in the saddle stitch unit”
- 4. “Examine stapler”
- 5. “READY (CHECK STAPLER)”
- 6. “Examine stapler in the saddle stitch unit”
- 7. “READY (CHECK SADDLE STITCH STAPLER)”
- 8. “READY (HOLE PUNCH DUST BIN IS FULL)”
- 9. “POWER FAILURE”
- 10. “Time for periodic maintenance”
- 11. “Check paper size setting on control panel for drawer N”
- 12. “Reboot the machine”
- 11. MAINTENANCE
- 12. SPECIFICATIONS & OPTIONS
- INDEX
261
8
2C72 POP Before SMTP
error
Check if the settings of POP Before SMTP and POP3 are cor-
rect.
2C80 Failed to process
received E-mail job
Ask your administrator to confirm whether the Received Internet
Fax Forward is set.
2C81 Failed to process
received Fax job
Ask your administrator to confirm whether the Received Fax
Forward is set.
2CC0 Job canceled Job was canceled.
2CC1 Power failure occurred Make sure that the power cable is connected properly and it is
inserted securely. Resend the job.
Save as File
2D10, 2D12,
2D13, 2D20-
2D22
Illegal Job status Turn the power OFF and then back ON.
Retry sending. If the error still occurs, contact your service rep-
resentative.
2D11 Not enough memory Make sure there are enough memory to save the scan job.
2D14 Invalid parameter
specified
Make sure you specify the settings correctly and try again.
2D15, 2D65 There are too many
documents in the
folder. Failed in creat-
ing new document.
Delete the data in the local shared folder in the equipment and
retry the scan.
2D30 Failed to create direc-
tory
Make sure that the access privilege to the storage directory is
writable and the server or local disc has a sufficient space. Then
retry the scan.
2D31, 2D33 Failed to create file Make sure that the access privilege to the storage directory is
writable and the server or local disc has a sufficient space. Then
retry the scan.
2D32 Failed to delete file Make sure that the access privilege to the storage directory is
writable and the server or local disc has a sufficient space. Then
retry the scan.
2D40 Failed to convert
image file format
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
2D60 Failed to copy file Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
2D62 Failed to connect to
network destination.
Check destination
path.
Check destination path.
Make sure that the network path is correct, and retry the scan. If
the error still occurs, ask your administrator to confirm whether
the IP address or path of the server is correct. Also make sure
that the server is operating properly.?
2D63 Specified network path
is invalid. Check desti-
nation path.
Make sure you specify correct network folder and retry the scan.
2D64 Logon to file server
failed. Check user-
name and password.
Make sure you specify correct user name and password to
logon the file server and retry the scan.
2D66 Failed to process your
job. Insufficient disk
space.
Delete the data in the local shared folder in the equipment and
retry the scan.
Error code Problem What to do