MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS Operator's Manual with GA-1211 with GA-1310 Series Series
©2008, 2009 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC. No patent liability is assumed, however, with respect to the use of the information contained herein.
Preface Thank you for purchasing TOSHIBA Multifunctional Digital Color Systems. This manual provides information about system restrictions and the GA-1211/GA-1310 specific functions applied when the GA-1211/GA-1310 controller is connected to the e-STUDIO4520C Series/e-STUDIO6530C Series. Read this manual before using your Multifunctional Digital Color Systems. Keep this manual within easy reach, and use it to configure an environment that makes the best use of the e-STUDIO’s functions.
CONTENTS Preface....................................................................................................................................... 1 Chapter 1 RESTRICTIONS Operations from the Control Panel......................................................................................... 6 COPY .................................................................................................................................... 6 SCAN ...............................................................
4 CONTENTS
RESTRICTIONS 1. This chapter describes system restrictions when the GA-1211 controller is connected to the e-STUDIO4520C series or GA-1310 controller is connected to the e-STUDIO6530C series. Operations from the Control Panel......................................................................................... 6 COPY .....................................................................................................................................................................6 SCAN ...............
1 RESTRICTIONS Operations from the Control Panel The e-STUDIO4520C series machine with the GA-1211 controller attached or e-STUDIO6530C series machine with the GA-1310 controller attached has several restrictions in the following operations: P.6 “COPY” P.6 “SCAN” P.7 “PRINT” P.7 “FAX” P.8 “USER FUNCTIONS” P.9 “JOB STATUS” y Buttons and items enclosed in red lines on the following screenshots in this section disappear or become dim when the controller is connected to the equipment.
1 RESTRICTIONS 1.
1 RESTRICTIONS USER FUNCTIONS The e-STUDIO4520C series machine with the GA-1211 controller attached or e-STUDIO6530C series machine with the GA-1310 controller attached has several restrictions in the following operation menus: P.8 “USER menu in USER FUNCTIONS” P.
1 RESTRICTIONS 1.RESTRICTIONS NETWORK menu in ADMIN menu The following provided for the NETWORK menu are unavailable. y [IPv6] y [IPX/SPX] y [NETWARE] y [SMB] y [APPLETALK] y [ETHERNET] y [IPsec] y [NETWORK CHECK] e-STUDIO4520C series/e-STUDIO6530C series e-STUDIO machine with the controller or e-STUDIO4520C Pro series/e-STUDIO6530C Pro series The setting operations for [IPv4] and [HTTP] differ depending on the equipment with or without the controller.
1 RESTRICTIONS INTERRUPT The [INTERRUPT] button on the control panel cannot be used while printing is in progress when the controller is connected to the equipment. For details on the [INTERRUPT] button, refer to the Copying Guide.
1 RESTRICTIONS TopAccess USER Mode The e-STUDIO4520C series machine with the GA-1211 controller attached or e-STUDIO6530C series machine with the GA-1310 controller attached has several restrictions in the following TopAccess USER mode operations: P.11 “Launching TopAccess” P.11 “TopAccess top page” P.
1 RESTRICTIONS e-STUDIO machine with the controller or e-STUDIO4520C Pro series/e-STUDIO6530C Pro series For details on the TopAccess top page, refer to the TopAccess Guide. Registering from TopAccess Registering private templates The following combinations of private template agents cannot be used when the controller is connected to the equipment: y The Copy agent cannot be combined with the Save as file agent.
1 RESTRICTIONS 1.RESTRICTIONS When the controller is connected to the equipment, the GA-1211/GA-1310 specific agents ([SMB/FTP/OTHER] check box) appear in the above page. From this page, you can create the GA-1211/GA-1310 specific private templates. For instructions on how to create them, see the following section: P.35 “Registering or editing GA-1211/GA-1310 specific private templates” Furthermore, the data destination of the Save as file agent is fixed to “Save to USB Media”.
1 RESTRICTIONS TopAccess ADMIN Mode The e-STUDIO4520C series machine with the GA-1211 controller attached or e-STUDIO6530C series machine with the GA-1310 controller attached has several restrictions in the following TopAccess ADMIN mode operations: P.14 “Setting up from TopAccess” P.17 “Maintaining from TopAccess” P.
1 RESTRICTIONS 1.RESTRICTIONS e-STUDIO4520C series/e-STUDIO6530C series e-STUDIO machine with the controller or e-STUDIO4520C Pro series/e-STUDIO6530C Pro series Setting up SNMP Network Service The following provided for the SNMP Network Service are unavailable when the controller is connected to the equipment.
1 RESTRICTIONS e-STUDIO4520C series/e-STUDIO6530C series e-STUDIO machine with the controller or e-STUDIO4520C Pro series/e-STUDIO6530C Pro series For details on the Network settings screen, refer to the TopAccess Guide.
1 RESTRICTIONS 1.RESTRICTIONS Maintaining from TopAccess The following menus are unavailable when the controller is connected to the equipment: y Upload Software y Remove Software e-STUDIO4520C series/e-STUDIO6530C series e-STUDIO machine with the controller or e-STUDIO4520C Pro series/e-STUDIO6530C Pro series For details on the Maintenance screen, refer to the TopAccess Guide.
1 RESTRICTIONS Software Included in the e-STUDIO Client Utilities CD-ROM The e-STUDIO Client Utilities CD-ROM contains the drivers and utilities listed below. However, some of them are unavailable when the controller is connected to the equipment.
GA-1211/GA-1310 SPECIFIC FUNCTIONS 2. This chapter describes the GA-1211/GA-1310 specific functions which are available when the GA-1211 controller is connected to the e-STUDIO4520C series or GA-1310 controller is connected to the e-STUDIO6530C series. Operations from the Control Panel....................................................................................... 20 Turning power off (Shutdown) .......................................................................................................
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS Operations from the Control Panel The e-STUDIO4520C series machine with the GA-1211 controller or e-STUDIO6530C series machine with the GA-1310 controller has several specific functions in the following operation menus: P.20 “Turning power off (Shutdown)” P.20 “MENU” P.21 “SCAN” P.32 “USER FUNCTIONS” Turning power off (Shutdown) The controller automatically shuts down in 1 - 2 minutes after the equipment has been shut down.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS SCAN When you press the [SCAN] button on the control panel, the SCAN screen is displayed on the touch panel. The following two buttons are different from those of e-STUDIO4520C series/e-STUDIO6530C series: 1 2 1. [USB] This button is used to save scanned images as PDF, XPS, TIFF, or JPEG files in a USB storage device. To learn more about Scan to USB, see the following section: P.21 “Scan to USB” 2.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS Scanning to USB 1 Place the original(s). 2 On the control panel, press the [SCAN] button to enter the SCAN menu. 3 Press [USB]. For help, refer to the Copying Guide. If you want to preview your scans later, press [PREVIEW] here and then select the scan function. For instructions on how to preview your scans, refer to the Scanning Guide. 4 To store the scan in the USB storage device, connect the device to the equipment and wait a few seconds.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS 5 If the “FOUND USB DEVICE” message appears on the touch panel, define the settings for the new file as required. 1) Press [FILE NAME] and change the file name. 2) Select an option for each of the FILE FORMAT, MULTI/SINGLE PAGE and/or SECURITY settings. 3) Finally, press [OK]. When you store scans in the USB storage device, do not disconnect the device from the equipment until data transmission is complete.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 6 Press [SCAN]. y To scan 2-sided documents or change settings such as Color Mode and Resolution, press [COMMON SETTING]. For details, refer to the Scanning Guide. y You can preview your scans by pressing [PREVIEW], followed by [SCAN]. For details, refer to the Scanning Guide. y You can set another scan function by pressing [e-FILING]. (Dual Agents) For details, refer to the Scanning Guide.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS Scan to SMB/FTP/OTHER This GA-1211/GA-1310 specific scan menu allows you to send and store scans to the following destinations: y SCAN TO SMB — to a specified network folder y SCAN TO FTP — to a specified FTP server y SCAN TO HOLD QUEUE — to the hold queue of the controller Scan jobs are held until users operate copying or moving them to the print queue with the job management tools.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 4 Continue the operation as required. y y y y 5 To store the scan in a network folder, proceed to Step 5. To store the scan in an FTP server, proceed to Step 6. To store the scan in the hold queue in the controller, proceed to Step 7. To store the scan in a mailbox in the controller, proceed to Step 8. Specify the following items as required and press [OK]. When you specify the setting items, proceed to Step 9.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS 6 Specify the following items as required and press [OK]. When you specify the setting items, proceed to Step 9. [NETWORK PATH] — Press this button to enter the path to a folder in the FTP server where you want to store the scanned data. For example, to transfer the scanned data to “ftp://10.10.70.101/user01/scan/”, enter “10.10.70.101\user01\scan” in this box.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 8 Specify the following items as required and press [OK]. When you specify the setting items, proceed to Step 9. [MAILBOX NAME] — Press this button to enter the mailbox name where you want to store the scanned data. [DOCUMENT NAME] — Press this button to change the document name. The document name can consist of a maximum of 31 characters. When you press each button, the on-screen keyboard is displayed.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS When performing a scan operation, you can select 2 scan functions at one time. If you want to perform a scan operation with 2 scan functions selected, select the second scan function that you want to use on the above screen, and make the settings required for the selected scan function. For example, if SCAN TO SMB and SCAN TO HOLD QUEUE have been selected, the following screen appears.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 11 If the screen below appears, place another original on the original glass and press [SCAN] or the [START] button to continue scanning. To finish the job, press [JOB FINISH], followed by the [FUNCTION CLEAR] button. y The above screen is not displayed under the following conditions: - You scan the original from the Reversing Automatic Document Feeder* without pressing [CONTINUE] to scan additional originals. - A scan preview is displayed.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS Regarding restrictions on Scan to SMB/FTP/OTHER Scan to SMB/FTP/OTHER is restricted depending on the Role Based Access Control setting as follows: y When “File Share” is OFF, the [SCAN TO SMB], [SCAN TO FTP] and [SCAN TO HOLD QUEUE] buttons are unavailable. y When “e-Filing” is OFF, the [SCAN TO MAILBOX] button is unavailable. y When “File Share” and “e-Filing” are OFF, the GA-1211/GA-1310 specific scan menu is unavailable.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS USER FUNCTIONS Follow the steps below for the setting operations of [IPv4] and [HTTP] provided in the NETWORK menu. Setting the TCP/IP protocol (IPv4) The TCP/IP settings are automatically set when the controller is installed. If the TCP/IP settings are changed, the equipment cannot communicate with the controller. Therefore, you can confirm the TCP/IP settings but you must not change the TCP/IP settings. 1 Press [NETWORK] in the ADMIN menu.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS 3 Confirm the settings and press the [CANCEL] button to return to the NETWORK menu. Do not change the TCP/IP settings. If the settings are changed, the equipment will be disabled to communicate with the controller. Setting the HTTP network service This function allows you to enable or disable the HTTP network server service that provides the web-based utility on the equipment, such as TopAccess and the e-Filing web utility.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 3 Specify the following items as required and press [OK]. ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable the HTTP network server service. This option must be enabled for using the following functions: y TopAccess y The e-Filing web utility y GA-1211/GA-1310 specific print functions y GA-1211/GA-1310 specific scan functions [PRIMARY PORT NUMBER] — The default primary port number “80” is always used.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS TopAccess USER Mode The e-STUDIO4520C series machine with the GA-1211 controller or e-STUDIO6530C series machine with the GA-1310 controller has several specific functions in the following operation menus: P.35 “Launching TopAccess from the WebTools home page” P.35 “Registering or editing GA-1211/GA-1310 specific private templates” Launching TopAccess from the WebTools home page To launch TopAccess, click the TopAccess link on the WebTools home page.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 3 When the Input Group Password page is displayed, enter the 5-digit password (or administrator’s password) for the selected private template group and click [OK]. The Private Templates page is displayed. 4 From the templates list, click the [Undefined] icon to register a new template, or click defined icon to edit the template.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS 5 When the Input Template Password page is displayed, enter the 5-digit password (or administrator’s password) for the selected private template and click [OK]. The Template Properties page is displayed. 6 Click [Edit] to define or edit the template properties. The Template Properties page to select agents is displayed. 7 Select the [SMB/FTP/OTHER] check box and click [Select Agent].
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 8 Click each button displayed in the page to specify or edit the associated template properties. [Panel Setting] — Click this button to specify the icon settings for the template. P.39 “Panel Setting (Private template)” [SMB/FTP/OTHER Setting] — Click this button to specify where the scanned document will be sent. P.39 “SMB/FTP/OTHER Setting (Private template)” [Scan Setting] — Click this button to specify how the document will be scanned for the SMB/FTP/OTHER agent.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS Panel Setting (Private template) In the Panel Setting page, specify how the icon for the template is displayed in the touch panel. 1 2 3 4 5 1) Picture This indicates the icon that will be displayed in the touch panel. The icon is automatically designated according to the agent that you select. 2) Caption1 Enter the text that will be displayed next to the icon in the touch panel. You can enter up to 11 alphanumeric characters.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 1) SMB Select this check box to store the scan in a network folder. 2) Network Path Enter the network path to the folder where you want to store the scanned data. For example, to specify the “users\scanned” folder in the computer named “Client01”, enter “\\Client01\users\scanned\” in this box. 3) Login User Name Enter the user name to access the network folder if required. 4) Password Enter the password for accessing the network folder if required.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 2.GA-1211/GA-1310 SPECIFIC FUNCTIONS Scan Setting (Private template) In the Scan Setting page, you can specify how originals are scanned for the SMB/FTP/OTHER agent. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1) Preview Select whether to display the scanned image on the control panel after the scanning an original. - OFF — Select this option not to display the scanned image. - ON — Select this option to display the scanned image.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS 7) Original Mode Select the document type of the originals. - Text — Select this option to set the Text mode as the default original mode. - Text/Photo — Select this option to set the Text/Photo mode as the default original mode. This can be selected only when [Black] is selected in the [Color Mode] box. - Photo — Select this option to set the Photo mode as the default original mode.
2 GA-1211/GA-1310 SPECIFIC FUNCTIONS TopAccess ADMIN Mode Registering or editing GA-1211/GA-1310 specific public templates The GA-1211/GA-1310 specific functions applied for making public templates are the same as those for private templates. For details, see the following section: P.
TROUBLESHOOTING 3. This chapter describes how to troubleshoot the problems that could occur while you are using the equipment with the GA-1211 or GA-1310 controller attached. Scanning Problems................................................................................................................ 46 The scanned data cannot be saved in the specified location ...............................................................................46 Error Codes................................................
3 TROUBLESHOOTING Scanning Problems This section describes troubleshooting for using scan data. The scanned data cannot be saved in the specified location Problem Description I have scanned a document from the [SCAN] button on the control panel by using the SMB/FTP/OTHER menu, but the data is not saved in the specified location. Corrective Action Check the following points: [SCAN TO SMB] y The network path to the folder where you want to store the scanned data is correctly specified.
3 TROUBLESHOOTING Error Codes TopAccess has the pages for the job lists; print, transmission, reception, and scan jobs. The following error codes are shown on these pages in the [Logs] tab (successful jobs have no codes). These codes help you specify the cause of an error you might encounter. The error codes are also shown on the [LOG] window of the touch panel. See the following lists when you find an error code on the touch panel.
INDEX A Automatic Start ..........................................................39 B Background ...............................................................42 C Caption1 ...................................................................39 Caption2 ...................................................................39 Color Mode ...............................................................41 Compression .............................................................41 Contrast ........................
50 INDEX
FC-5520C/6520C/6530C FC-2330C/2820C/2830C/3520C/3530C/4520C OME080104A0
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS Operator's Manual with GA-1211 with GA-1310 Series Series ©2008, 2009 TOSHIBA TEC CORPORATION All rights reserved R080620G0201-TTEC Ver01 2009-02
