User's Manual

User manual HANDY TERMINAL
12
☞
☞☞
☞ NOTE: The battery door must be installed prior to booting the unit.
5. Tighten the hand strap.
WARNING: Use only Toshiba Tec-approved Li-Ion battery packs. Unauthorized battery may result in damage not
covered by the warranty.
3.2. Charge the Batteries
Handy Terminals ship with both the main battery pack and internal backup battery significantly
discharged of power. Charge the main battery pack with the Handy Terminal charging cable for a
minimum of 4 or 6 hours depending on your battery before initial use.
1. Attach the appropriate plug adapter to the plug of the power cable.
2. Insert the plug into the appropriate power source.
3. Plug the Handy Terminal power cable into the DC Power Jack on the bottom end of the unit.
WARNING: Use only Toshiba Tec-approved peripherals, power cables, and power adapters. Unauthorized
peripherals, cables, or power adapters may cause batteries to explode or damage your device.
DO NOT attempt to charge damp/wet handy terminals or batteries. All components must be dry before connecting
to an external power source.
Batteries must be charged at a temperature ranging from 3~42℃ (±3℃). If you don’t follow the guide, it might
have a harmful effect on the battery life.
CAUTION: After the battery has been charged, disconnect the DC Power Jack from the terminal. If you stay on
that plug in use, it is possible to break the power code.
☞
☞☞
☞ NOTE: Rechargeable battery packs are not initially charged. Therefore the first operation to perform is to charge