User's Manual

User manual HANDY TERMINAL

Hand Strap

The HANDY TERMINAL comes with an adjustable, elastic hand strap. You can attach it to

the device.

Keep in mind that the hand strap covers the battery. When you want to replace the battery,

you will need to adjust the hand strap accordingly.

Finger Saddle

This is a slightly depressed and angled area of the back housing that is designed to cradle

or “saddle” your finger while holding the terminal. This unique ergonomic design makes the

terminal comfortable to hold and helps prevent you from accidentally dropping the terminal.

Installed Battery

For information about installing the battery, see Install the Battery on paragraph 3.1.

For information about battery power, see Battery Power on paragraph 4.17.

Speaker

The integrated speaker sounds audio signals as you scan bar code labels and enter data,

but emits no ambient noise on system activity (i.e., processor, memory access, radio traffic,

etc.). The speaker can also be used for playing sounds (e.g., WAV or MP3 files).

The speaker meets the following SPL levels at 10cm:

• 500Hz–80dB

• 1kHz–90dB

• 4kHz–90dB

Stylus

HANDY TERMINAL is shipped with a stylus inserted in a loop on the hand strap. Store the

stylus in the hand strap when you’re not using it; see Using the Stylus on paragraph 3.8.