Operation Manual

3. READ (X) AND RESET (Z) REPORTS EO1-11154
3.2 General Notes On Report Takings
3-17
Zone PLU Read or Reset (Daily)
Read Report Sample
• Operation: Mode Lock: X for read
Z for reset
When the ECR is being outside a sale and in X mode, depress the
[1] or [Enter] key.
Select “PLU” with the [↓] or [↑] key, then depress the [7] or [Enter]
key.
Select “ZONE PLU” with the [↓] or [↑] key, then depress the [2] or
[Enter] key.
Enter a zone-start PLU code (4 digits), then depress the [x] key.
Enter a zone-end PLU code (4 digits), then depress the [AT/TL] key.
For this sample
Mode Lock: X or Z
(for Daily)
0001 [X]
0100 [AT/TL]
Zone-start PLU Code -> Zone-end PLU Code
PLU Code
PLU Name
Item Count, Amount
Total Item Count and
Amount of Total of all PLUs read in this report
Negative Total Item Count and
Amount of Total of all PLUs read in this report
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #3001
X_PLU_ZONE
0001->0100
0001
Tomato
3 €0,50
0002
Lemon
1 €1,00
TOTAL 4
€1,50
-TOTAL 0
€0,00
9999 19:00TM
NOTE: In Zone PLU Read Reports:
• PLUs of zero sale will be skipped.
• PLUs not existing in the PLU Program File memory
will not be printed in reports (in any reports).