User's Manual

86
Basic features
Selecting the video input to view
To temporarily program the CH RTN button with a particular
channel:
1 Tune to the channel you wish to program to the CH RTN
button.
2 Press and hold the CH RTN button
for approximately 4
seconds until the message “Memorized” appears. The channel
has been programmed to the CH RTN button.
3 You can then change channels repeatedly, and when you press
the CH RTN button, the memorized channel is tuned to.
After pressing the CH RTN button
and then changing channels
again, the memory is cleared and the button functions as Channel
Return.
Selecting the video input to view
To select the video input to view:
1 Press the INPUT button on the remote control or TV control
panel.
2 Change the input:
❖ Press
0–8.
❖ Repeatedly press the ( / arrow) buttons, and then press
the OK button.
❖ Repeatedly press the INPUT button.
Inputs
0 ANT/CABLE
1Video 1
2Video 2
3 ColorStream HD1
4HDMI 1
5HDM 2
6HDM 3
7HDM 4
8PC