OPERATOR'S MANUAL PAPER COPIER 120/150

7-25
Scanning with the “Scanner and Camera Wizard” in Windows XP
Windows XP includes as a standard feature an image scanning function. The procedure for scanning with
the “Scanner and Camera Wizard” is explained here.
To cancel scanning, click the “Cancel” button in the screen that is displayed.
1
Place the original you wish to scan on the original table.
For the procedure for placing the original, see “ORIGINAL PLACEMENT” (p. 3-5).
2
Click the “start” button, select “Control Panel”, and click
“Printers and Other Hardware”, and then click “Scanners
and Cameras” in the start menu. Click the “TOSHIBA
e-STUDIOxxx” (where xxx is the model name of your
unit) icon and click “Get picture” in “Imaging Tasks”.
3
The “Scanner and Camera Wizard” appears. Click “Next”
and establish the basic settings for scanning.
For information on the settings, see the Windows XP help
file. After completing each setting, click “Next”.
4
Select a name, format, and folder for the scanned image.
For information on the image name, file format, and folder,
see the Windows XP help file.
5
Scanning begins. When scanning ends, select the next
task you wish to perform.
For information on each selection, see the Windows XP
help file. To quit the “Scanner and Camera Wizard”, select
“Nothing. I’m finished working with these pictures.” and click
“Next”.
6
Click “Finish” in the screen that appears.
The “Scanner and Camera Wizard” closes and the scanned image is saved.