Important Safeguards Welcome to Toshiba Connecting your TV Using the Remote Control Setting up your TV Appendix 5/3/03, 2:59 PM 1 3M70101B/E COVER Using the TV’s Features 14AF43 20AF43 24AF43
Important Safeguards Dear Customer, Child Safety Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference.
1) 2) 3) 4) Installation, Care, and Service Installation Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Follow these recommendations and precautions and heed all warnings when installing your TV: 6) Clean only with a dry cloth. 16) 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Important Safeguards 29) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate. 23) Always operate this equipment from a 120 VAC, 60 Hz power source only.
Exploring your new TV ................................................................................................................................ 6 Selecting a location for the TV .................................................................................................................... 6 Important Safeguards Important Safety Information .......................................................................................... 2-4 Welcome to Toshiba...........................................
Welcome to Toshiba Welcome to Toshiba Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. You may need to purchase other audio or video cables to connect your equipment. See “Connecting your TV” on page 7 for more information. Please read all the safety and operating instructions carefully before you begin.
Important Safeguards Connecting your TV If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.) Welcome to Toshiba • A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors. • Standard A/V (audio/video) cables are usually color coded according to use: yellow for video and red and white for audio.
Connecting a cable converter box This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device, which is generally provided by the cable company.
This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record from the satellite receiver and TV, as well as record one TV channel while watching another channel.
Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR. You will also be able to record from one TV channel while watching another channel. You will need: • two coaxial cables • two sets of standard A/V cables Stereo VCR / Playback To antenna Note: IN IN from ANT Do not connect the same VCR to the output and input jacks on the TV at the same time. For better picture quality, if your VCR has Svideo, you can use an S-video cable instead of the standard video cable.
Important Safeguards Using the remote control Preparing the remote control for use Installing the remote control batteries Note: The TV remote control may or may not operate your VCR, DVD player, or cable TV converter. Refer to the owner’s manuals supplied with the equipment to see which features are available. In addition, the original controllers may have features not available on this remote control. If you would like to continue to use these features, you may want to use the original remote control.
To control a cable TV converter: CABLE POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 Power Program the remote control to recognize the brand of your converter Channel (see “Programming the Numbers remote control for use with a VCR, DVD player, or cable TV converter” Channel +/– below). The buttons shown at right will control the cable TV converter. Enter Press the CABLE button first.
VCR 01,06 01 14 10 08 32, 18 25 04, 26, 27, 28 00 01 03 22 00, 30 07, 12 31 32, 18 RCA DSS Regency Samsung Scientic Atlanta Sprucer Standard Comp Texscan Tocom Unika United Satellite Universal Vid Tech Video Way Viewstar Zenith Zenith Satellite 73 29 35 16, 23, 36, 64 13 35 39, 56, 71 17, 18, 46 48, 62 44 58, 62 40 49 54, 55, 72 01, 53, 74 12, 28, 30, 51 CABLE TV CONVERTER Allegro Allegro A/B Switch Gemini General Electric General Instrument Hamlin Jerrold Kale Vision Macom Magnavox NSC Oak Panasonic Pa
Learning about the remote control POWER turns the TV on and off Sleep programs the TV to turn off at a set time (page 28) TV/Video selects the video input source (page 27) Channel + / – cycles through programmed channels (page 16) TV/VCR/DVD/CABLE TV/VCR/DVD/Cable select TV, VCR, DVD, or CABLE mode (page 11) POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 Channel Numbers allow direct access to channels (page 16) Volume + / – adjusts the volume level Channel Numbers Channel Return returns to the last
Important Safeguards Setting up your TV After you have installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu system. You can access the menu system with the buttons on the remote control. Changing the on-screen display language POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 You can choose from three different languages (English, French and Spanish) for the on-screen displays.
Adding channels to the TV’s memory Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel + or –. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually. To add channels automatically: 1.
POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 Adjusting the channel settings Switching between two channels You can switch between two channels without entering an actual channel number each time. VOL Ð Channel Numbers VOL + CH Ð EXIT RECALL TV/VIDEO DVD MENU FAV CH RTN FAV 1/2 16:9 CH RTN DVD CLEAR TOP MENU DVD MENU You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature.
To clear your favorite channels: 1. Select a channel you want to clear. 2. Press MENU, then press or to display the OPTION menu. 3. Press ▲ or ▼ to highlight FAVORITE CH. 4. Press or to display the FAVORITE CH menu. SET/CLEAR will be highlighted.
or Important Safeguards 3. Press to display the V-CHIP menu. CH PICTURE AUDIO SETUP OPTION V-CHIP BLOCKING PIN CODE [0-9] EXIT SET If you forget your PIN code, press RECALL four times within five seconds from the V-CHIP menu. This allows you to proceed to the BLOCKING menu and resets your PIN code. ENTER 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code. Press ENTER.
MPAA Ratings X NC17 R PG13 PG G For adults only. Not intended for anyone 17 or under. Restricted. Under 17 requires an accompanying parent or adult guardian. Parents strongly cautioned. Some material may be inappropriate for children under 13. Parental guidance suggested. Some material may not be appropriate for children. General audience. Appropriate for all ages. Youth TV Ratings Y7FV, Y7 Y Directed to older children. This program is designed for children age 7 and above.
TV VCR 1 2 3 4 5 6 100 7 8 9 0 CH + CABLE DVD VOL + MENU/ ENTER SETUP OPTION Channel Numbers Menu/ Enter V-CHIP ENABLE BLOCKING SET RATING BLOCKING OPTION NEW PIN CODE SELECT CH Ð ON OFF START START START EXIT RECALL TV/VIDEO DVD MENU ADJUST RESET CAP/TEXT Welcome to Toshiba VOL Ð CH PICTURE AUDIO POWER Important Safeguards To use the V-Chip to block programs by rating: 1. Press MENU, then press or to display the OPTION menu. 2. Press ▲ or ▼ to highlight V-CHIP. 3.
Blocking unrated movies or programs Some movies and programs are not rated. You can block these movies and programs using the V-Chip. To block unrated movies or programs: 1. Press MENU, then press or to display the OPTION menu. 2. Press ▲ or ▼ to highlight V-CHIP. 3. Press or to display the V-CHIP menu. 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code. Press ENTER.
Important Safeguards Welcome to Toshiba To unlock channels: 1. Press MENU, then press or to display the OPTION menu. 2. Press ▲ or ▼ to highlight LOCK and then press or to display the LOCK menu. 3. Use the Channel Number buttons (0-9) to enter your PIN code, then press ENTER. The LOCK menu appears. 4. Press ▲ or ▼ to highlight CH LOCK and press or to display the CH LOCK menu. 5. Press or to highlight CLEAR and clear all channels from the list of locked channels. Press ENTER. 6.
Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press the Recall button. You can choose any four characters to identify a channel. POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 To create channel labels: 1. Select a channel you want to label. 2. Press MENU, then press or until the OPTION menu appears. 3. Press ▲ or ▼ to highlight CH LABEL.
Important Safeguards Setting the clock You must set the clock before you can program the ON/OFF timer. To set the clock: (Example: 8:30 AM) 1. Press MENU, then press or to display the OPTION menu. 2. Press ▲ or ▼ to highlight ON/OFF TIMER.
5. Press ▲ or ▼ to set the desired hour, then press . POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 CABLE CH PICTURE AUDIO SETUP OPTION ON/OFF TIMER CLOCK 12:00 AM ON TIMER 7:00 AM CH 001 CLEAR OFF TIMER DVD 12:00 AM CLEAR SELECT ADJUST END EXIT 6. Set the desired minutes and channel, as in step 5. 7. Press to select ONCE or DAILY timer date.
Important Safeguards Adjusting the picture quality You can adjust the picture quality to your personal preferences, including the contrast, brightness, color, tint, and sharpness. The qualities you choose will be stored automatically in your TV’s memory so you can recall them at any time. To adjust the picture quality: 1. Press MENU, then press or POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 to display the PICTURE menu.
Setting the sleep timer You can set the TV so it turns off automatically. POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 To set the sleep timer: Repeatedly press SLEEP on the remote control to set the length of time until the TV turns off. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.
Important Safeguards Adjusting the sound Muting the sound POWER POWER TV TV VCR VCR CABLE CABLE DVD DVD Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word MUTE in the lower right-hand corner. To restore the sound, press MUTE again.
Adjusting the sound quality You can change the sound quality of your TV by adjusting the bass, treble, and balance. To adjust the sound quality: 1. Press MENU, then press or POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 until the AUDIO menu appears. CH PICTURE AUDIO SETUP OPTION BASS TREBLE BALANCE BBE OFF SURROUND OFF STABLE SOUND OFF SELECT ADJUST 32 32 0 VOL Ð CH + CABLE DVD VOL + MENU/ ENTER Menu CH Ð EXIT RECALL TV/VIDEO DVD MENU 2.
Important Safeguards Using the surround sound feature POWER TV VCR 1 2 3 To turn on the surround sound feature: 1. Select the STEREO mode, if available (see “Selecting stereo/SAP broadcasts” on page 29.) 2. Press MENU, and then press or until the AUDIO menu appears. 3. Press ▲ or ▼ to highlight SURROUND. 4. Press or to highlight ON.
Appendix Troubleshooting Appendix Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on • Make sure the power cord is plugged in, then press POWER. • The remote control batteries may be dead. Replace the batteries. No picture, no sound • Check the antenna/cable connections.
14AF43 Picture Tube Type 14 (357 mm diagonal) Television system NTSC standard Channel coverage VHF: 2 ~ 13 20AF43 24AF43 Type 20 (508.0 mm diagonal) Type 24 (600 mm diagonal) Cable TV: 4A, A-5 ~ A-1, A-I, J ~ W, W+1 ~ W+48 Power source 120V AC, 60 Hz Power consumption 80 W 105 W 125 W Audio power 2.5W + 2.5W 2.5W + 2.5W 5.0 W + 5.0 W 1-5/8 x 2-13/16 inches 2 x 4-11/16 inches (50 x 119 mm) x 2 pcs.
Limited United States Warranty For 24'' FST PURE® and All Smaller Television Models Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii, Inc. (“THI”) make the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED IN THE U.S.A.
For 24'' FST PURE® and All Smaller Television Models Toshiba of Canada Limited (“TCL”) makes the following limited warranties to Your Responsibility original consumers in Canada. THESE LIMITED WARRANTIES EXTEND THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON CONDITIONS: RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL (1) You must provide your bill of sale or other proof of purchase.
National Service Division TEL.: (905) 470-5400 Service Centers: TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA TEL.: (905) 470-5400 MONTREAL: 1643 NORTH SERVICE RD., TRANS-CANADA HIGHWAY, DORVAL QUEBEC, H9P 1J1,CANADA TEL.: (514) 856-4100 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C., V62 1J5, CANADA TEL.: (604) 303-2500 ColorStream®, FST Pure® and StableSound® are registered trademarks of Toshiba America Consumer Products, Inc.