Manual

If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must
also connect the audio cables to the AUDIO IN (LINE 2 IN) jacks on the left side of the TV/DVD. The S-VIDEO
cable only carries the video signal. The audio signal is separate.
Select the "VIDEO2" by pressing INPUT SELECT repeatedly. Left side (LINE 2 IN)
(red) \ i
(white). \ i _
: Signal flow Ex VCR with S-Video To AUDIO (L/R) IN __
" I L,,e_..j@
I "1 p,aybac. io
/ --_ I I -'<_
OUT t t To Audio (L/R) OUT / ......
ToS-V,DEO I ToS-V,DEO,N
Audio cable (not supplied) /
S-Video cable (not supplied)
Note: When the S-VIDEO cable and the standard video cable are connected at the same time, the S-video cable takes precedence.
O
o
&
o
÷
®
Your TV/DVD is capable of using ColorStream (component video). Connecting your TV/DVD to a component
video compatible DVD player, such as a Toshiba DVD player with ColorStream ®can greatly enhance picture
quality and performance.
Ex. DVD player with Component video
: Signal flow
To Component
Video OUT
_oooooo
ttt
?
Rear lower right of the TV
=/,
t
ToAudioOUT ' J
_ Audio cable (not supplied) /
Component video cable (not supplied)
To COMPONENT
(Y, Ps, PR)IN
[] Selecting Component input mode
Press iNPUT SELECT repeatedly to
select ColorStream mode.
A
"When using the Component video cable, 1
an Audio cable must be connected to |
AUDIO IN (L/R) (LINE 1 IN) jacks.
The ColorStream ® inputs on this unit are for use with devices that output 480i interlaced signals and 480p progressive signals.
This unit will not accept or display 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-
definition set-top receiver, 720p progressive scan DVD player, or other similar device to the unit's ColorStream ® inputs, YOU MUST
SWITCH THE DEVICE'S OUTPUT TO 480i INTERLACED OR 480p PROGRESSIVE MODE FIRST. Failure to do this will cause a
poor or no picture to display. J
Notes:
• Refer to the owner's manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the
tuner and radio.
÷
17
J5X00221A [E] (P14-25) 17 _ 21/02/2006, 8:39 PM