Power Supply User Manual
1800 Series User Manual
13
INSPECTION/INSTALLATION
INSPECTION OF THE NEW UPS EQUIPMENT
Upon receipt of the UPS, a careful inspection for shipping damage should be
made.
UNPACKING INSTRUCTIONS
AFTER UNPACKING
1) Check the unit for loose, broken, bent or otherwise damaged parts. If
damage has occurred during shipment, keep all original packing materials
for return to shipping agent. Warranty will not apply to units damaged
during shipment.
2) Check to see that the rated capacity and the model number specied on the
nameplate conform to the order specications.
INSTALLATION PRECAUTIONS
CAUTION
Remove box and foam pack.
Unbolt mounting rails from both
pallet and unit.
Place mounting rails at front of
pallet as shown.
1.
2.
3.
Insert bolts removed from pallet
into holes at top of ramp.
Place tie bracket in slots near
base of ramp.
4.
5.