Satellite User's Guide

49
Getting Started
Setting up your computer
CAUTION: To avoid damaging the computer’s screws, use a
small Standard #1 Phillips screwdriver that is in good
condition.
Removing the memory slot cover
CAUTION: Static electricity can damage the memory module.
Before you handle the module, touch a grounded metal
surface to discharge any static electricity you may have built
up.
Avoid touching the connectors on the memory module or on
the computer. Oil or dust on the connectors can cause
memory access problems.
6 Remove the memory module from its antistatic packaging,
holding it by its edges.
7 Gently slide the module into the socket.