Satellite User's Guide

Getting Started

Setting up your computer

Connecting a mouse

You may want to use a mouse or trackball instead of the

computer’s built-in TouchPad. Your notebook computer supports

USB and PS/2-compatible pointing devices.

The TouchPad

can remain operable, even if you connect a

secondary pointing device to the computer. For more information,

see “Toshiba Hardware Setup” on page 172.

Using a USB mouse

1 Connect the mouse cable to the USB port.

2 Install the vendor supplied software that came with the

mouse, if needed.

Using a PS/2 mouse

The system cannot detect a PS/2 mouse if you connect it after

starting the computer.

NOTE: If you connect a PS/2 mouse to the computer while it

is in Standby mode, you will not be able to use the mouse

when you turn the computer on.

CAUTION: When connecting any PS/2 device, turn off your

computer to prevent any possible hardware damage.

1 Attach the PS/2 mouse cable to the PS/2 port.

2 Refer to your mouse documentation for configuration steps.