Satellite User's Guide

Learning the Basics

Using your CD or DVD drive

Playing a DVD

This manual has a separate chapter on using the WinDVD

software application for playing DVDs. For information, see

“WinDVD 2000” on page 175.

Removing a disc

Removing a disc with the computer on

1 Press the eject button.

CAUTION: Never press the eject button while the computer is

accessing the CD-ROM/DVD-ROM drive.

If the disc is still spinning when you open the disc tray, wait

for it to stop before you remove it.

2 Pull the disc tray until it is fully open, remove the disc, and

place it in its protective cover.

3 Close the disc tray.

Removing a disc with the computer off

1 Insert a slender object, such as a straightened paper clip, into

the manual eject button hole.

CAUTION: Never use a pencil to press the manual eject

button. Pencil lead can break off inside the computer and

damage it.

2 Pull the disc tray until it is fully open, remove the disc, and

place it in its protective cover.

3 Close the disc tray.