Operation Manual

English
47
CONTROLS AND FEATURES
Guide
Select the on-screen guide by pressing
GUIDE, the guide screen will appear
highlighting details of the programme and
event currently being viewed. This may
take a few moments to appear.
Press ◄ or ► for information on other
events scheduled for the programme
selected.
For details of other programmes currently
available, press ▲ and ▼ to scroll up and
down the programme list.
NOTE: For the recording operation to work
properly, the media recorder must be set to the
same time as the TV. Regarding the process for
recording, please refer to the owner's manual of
the recording equipment.
EPG Timer
EPG (Electronic Programme Guide) supports 8
sets of timers. You can set or cancel a timer for a
selected programme within the guide. When the
TV is on and the timer activates, a dialogue box is
shown informing you that the programme is about
to start. When the TV is in standby mode and the
timer activates, the TV will wake up with backlight
off, speaker mute on, and change to the channel
selected.
You must set the time correctly before using
this function. All set timers are cleared when
performing a new channel scan.
Press button to set/unset Timer in the
selected programme.
An indicator will be shown in the detail
information area when a timer function is
set..
Press BLUE button to enter the
programme timer list page.
NOTE: Time can be set manually in the Menu/
Timer/Time OSD menu.
After adjustment, the TV clock may not match the
time in the EPG Programme Guide. The EPG
Programme Guide time follows the broadcast
stream time which can not be adjusted.
Software upgrade and
system information
Auto Download
This feature enables your TV to download new
software by air automatically.
In the SETUP menu, press ▼ to highlight
Software Upgrade and press ► or
to
enter.
Press ▼ to highlight Auto Download.
Press ◄ or ► to select On or Off.
Software Upgrade
Select Back Exit
EXITRETURN
Auto Download
Manual OAD
System Information
Off
OffAuto Install
Auto Install
This feature enables your TV to install new
software automatically.
In the SETUP menu, press ▼ to highlight
Software Upgrade and press ► or
to
enter.
Press ▼ to highlight Auto Install.
Press ◄ or ► to select On or Off.
Auto Download
Auto Install
Manual OAD
System Information
Software Upgrade
Off
Off
Select Back Exit
EXITRETURN