Manual

Connecting a DVD player with ColorStream ® (component video), a VCR,
and a sateJJJte receiver
From antenna
panel Stereo VCR
TV back
Satellite receiverwith componentvideo or
DVDplayer with componentvideo
You will need:
• coaxial cables
• standardA/V cables
- If you have a mono YCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only
• standard audio cables
• component video cables
- Youcan connect the component video cables
(plus audio cables) from the DVD player or
satellite receiver to the Co/erStream terminal
on the TV,The ColorStream HD terminal
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems.
A 1080i signal willprovide the bestpicture
performance (1080p is not supported).
To view antenna or Cable channels:
Select the AliT/CABLEvideo input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the Co[orStreamliD
video input source on the TV.*
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the Co[orStream
lid video input source on the TV.*
To view the VCR or view and record
antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want
to watch. Select the VIDE0video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to
record. Select the Co[orStream liD video input source
on the TV* to view the DVD.
,_ To select the video input source, press INPUT on the
remote control (_ page 21 ).
Theunauthorizedrecording,use,distribution,or
revisionoftelevisionprograms,videotapes,DVDs,
and othermaterialsis prohibitedunderthe Copyright
Lawsof the UnitedStatesandothercountries,and may
subjectyoutocivil and criminalliability.
151