Manual

3 Press A or V to select the item you want to
control and press EN}@.
Power Turns the select device oll and off.
Root Accesses the top menu of the selected
Menu device.
Accesses the contents list when you press
Contents
@. At thistime, the REGZA-LIRKPlayer
Menu
Control menu will disappeal:
Setup Accesses the setup menu of a DVD
Menu player.
Top Menu Accesses the top menu of a DVD.
Menu Accesses the menu of a DVD.
Note:
,, These functions depend on the devices that are
connected.
• The REGZA-LJNKPlayerContr01item will be
grayed out in the following conditions:
_A non-HDMl input is currently selected.
_ The EnableREGZ,_-UNKitem is set to Off.
_ The connected CEC device is not a
playback or recording device.
REGZA-LINR® inputsourceselecUon
If a REGZA-LINK device with HDM[ switching
capability (e.g. Audio Receiver) is connected to
the HDM[ input, you can select another REGZA-
LINK device that is connected to the master HDM[
device using the TV's INPUT button. See page 29 for
details.
VOLUMEand MUTEcontrolsof Audio
Receiver
With your TV's remote control, you can adjust or
mute the sound volume of the Audio Receiver.
• _ v__ adjust the volume level.
• _ turns off the sound.
Note:
° To use this function:
_ Set Speaker Preference to Audio Receiver in
the REGZA-LINK Setup menu.
_ Confirm that a connected REGZA-L/NK device
(such as DVD player, etc) is selected for the
Audio Receiver input soume.
° You can also use this function when the audio
receiver is connected to the TV_sDIGITAL
AUDIO OUT terminal (not HDMI connection).
In this case, select a digital audio input mode
on the Audio Receive_
o These functions depend on the device
connected.
Other REGZA-LINR®functions
When the Enable REGZA-LNRand each item in the
REGZA-LNRSetup menu are set to On, the following
functions will be enabled.
If aconnected HDMI device starts
TV Auto playingvideo or audio, the TV will
[nput Switch automaticallyswitch to the appropriate
HDMI input.
TV Auto If aREGZA-LINK &vice is turned on,
Power theTV turns on auk_matically.
If the TV is turned off"the TV will send
Device Auto
Standby amessage to turnoff allof the REGZA-
LINK devices connected to the TV.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers
or the audio receiver speakers. When
this item is set to Audio Receiver,
the TV remote can be used to adjust
or mute the volume of the audio.
This item will be grayed out unless
a REGZA-LINK compatible audio
receiver is connected.
Note: When you turn on the Audio Receiver,
change its input source, or adjust the sound
volume, the sound will be output from the audio
receiver's speakers even ff TV Speakers has
been selected. Turn the TV off and on again to
output the sound from the TVspeakers.
To set the REGZA-LINK <_>Setup:
1 From the Setup menu, highlight REGZA-LIRK
Setup and press @.
(c'o_7fi_7ued)
49