Manual

7) VESA Mounting Pattern
19" lOOxlO0 mm M4
22" 100x 1O0 mm M4
26" 200x 1O0 mm M4
32" 200x200 mm M6
(mlit in ram)
Removingthe Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leavethe stand protruding over the edge of the
surface.
Note; Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Removethe four screws shown in the right
diagram. This will allow removal of the pedestal
stand.
3) Onceyou have removed all four screws, holding
the pedestal stand in place, remove the pedestal
stand from the TV.
19" TV
VESA Mounting Pattern
Four
22" TV
VESA Mounting Pattern
Four screws
CAUTION:Alwaysplacethe TVon the floor or a sturdy,
level,stablesurfacethat cansupporttheweightof the unit.
26" TV
VESA Mounting Pattern
32" TV
Hook
Sturdy strap
(as short as possible)
VESA Mounting Pattern
Four screws"'"_L'-2--J Hook
Sturdy strap
(as short as possible)
CAUTION:Always place the TV on the floor or a
sturdy, level, stablesurface that can support the
weight of the unit. Tosecure the TV,use a sturdy
strap from the hook(s) on the rear of the TV to a wall
stud, pillar, or other immovable structure. Make sure
the strap is tight, secure,and parallel to the floor.
I 6