Operation Manual

- 31 -
Standby Search (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
If the Standby Search is set to On and the TV is in
standby mode, the TV will look for any changes in
the saved channels. Press MENU button and select
Settings by using Left or Right button. Press OK
button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select
Standby Search using Up or Down button and use
Left or Right button to set.
Full Mode (optional)
If you connect a device via HDMI or YPbPr connectors
and set 1080i/1080p resolutions, Full Mode item will
be visible.
Teletext language
Use this setting to set a preferred Teletext language.
Press MENU button and select Settings by using Left
or Right button. Press OK button to continue. Use Up
or Down button to select Language and then press
OK button. Select Teletext language using Up or
Down button and use Left or Right button to set.
HDMI True Black
While watching from HDMI source, this feature will be
visible in the Picture Settings menu.
You can use this feature to enhance blackness in the
picture. You can set this feature as “On” for activating
HDMI True Black mode. Press MENU button and
select Picture by using Left or Right button. Press OK
button to continue. Select HDMI True Black using Up
or Down button and use Left or Right button to set.
Note: HDMI True Black On/Off feature functions only
when the HDMI device output is set to RGB.
Other Controls - continued
TV_INTERNET.indd 31TV_INTERNET.indd 31 02.06.2011 20:54:4002.06.2011 20:54:40