Operation Manual

11
Quick guide for ANALOG MENU operation/Selecting the
video input source/On-screen Language Selection
Make sure the aerial connection and
power supply are connected as per
the description on previous page.
Preparations:
Turn on the unit with the
(Power)
button on the unit. The
(Power)
indicator will light up in green.
To change the unit to standby mode,
press
on the remote control.
(Power) indicator will change
from green to red. To turn on the unit
from standby mode, press
on the
remote control again.
In standby mode, you can also turn
the unit on with
(Channel) or
on the unit or PAGE / on
the remote control.
To turn off the unit press
(Power)
button on the unit - to completely
switch it off, disconnect the mains
power supply.
Press TV/DVD to select the TV mode.
Press ATV/DTV to select the
analogue TV mode.
•
•
•
Quick guide for ANALOG MENU operation
Call ANALOG MENU and for example: Select AUTO TUNING.
1
Press INPUT.
Select ATV. Press MENU.
2
Press ◀ or ▶ to select .
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
4:3
3
Press ▲ or ▼ to select AUTO
TUNING, then press ENTER to
enter the AUTO TUNING menu.
... on the following pages the MENU
can be called in the same way as
here.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
4:3
4
Press EXIT to return to the normal screen.
Selecting the video input source
Press INPUT to view a signal from
another device connected to your TV,
such as a VCR or DVD player. You can
select each input source depending on
which input jacks you used to connect
your devices.
To select the video input source, press ▲
/▼. Then press ENTER within 6 seconds.
You can return to ATV mode by pressing a numbered button
even if you switched to external input mode from DTV mode.
On-screen Language Selection
1
Select LANGUAGE (unless you
have already selected when the set
was first switched on).
Then press ENTER.
ENGLISH
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
4:3
2
Press ◀ or ▶ to select the desired language.
3
Press EXIT to return to the normal screen.
•
Note:
If no buttons are pressed for more
than approx. 60 seconds, the MENU
disappears automatically.
•
ATV
AV1
DTV
AV2
COMPONENT
HDMI
INPUT SELECT
51Z0231A_ENG.indd 1151Z0231A_ENG.indd 11 9/16/08 3:28:41 PM9/16/08 3:28:41 PM