Operation Manual

25
Note:
There are 15 age-based ratings,
ranging from ‘4’ (years old) to ‘18’
(years old) and ‘None’. Eg. If the
Parental Lock is set to ‘8’ (years
old), only the services which have
the parental rating of ‘8’ (years old)
or under will be viewable without
entering the Password.
You will be prompted to enter the
password, when you set new
parental rating.
You can set the new parental rating
only when you enter the password
correctly, otherwise the old parental
code will be retained.
•
•
Password Setup (Parental lock)
This feature allows you to have a parental control of the service
viewing as per your preference.
Once a service is protected with a password, it cannot be
viewed unless the correct password is provided.
1
Press ▲ or ▼ to select ‘Password Setup’, then press
ENTER.
P
Subtitle
assword Setup
Display Setup
Time Setup
Main menu System Configuration
ABC
CH1
CH2
CH3
Texd
CI
i
ABC
i
2
‘Enter Password’ will appear. Press ‘0 0 0 0’ using the
Number Buttons. (This is the default password.)
3
Press ▲ or ▼ to select ‘Parental Lock’, then press ◀ or ▶ to
select desired parental rating (see note). Then press EXIT
to return to the normal screen.
4
You can also change the password using the next option.
Press ▲ or ▼ to select ‘Change password’.
Then enter your chosen new password (0 to 9), be sure to
remember this password. After you have entered the new
password for the first time, you need to enter the same
password again for confirmation. The Information banner
will then appear.
Press EXIT to return to the normal screen.
While toggling between channels, if a service which has a
parental rating is selected then you will be asked to enter the
correct password to view that channel. If the channel you are
currently watching supports a parental rating then the rating will
also be displayed in the Channel banner menu (see page 27).
Password Setup (Parental lock)
If you forget your password, follow steps below to
reset the password.
1. Press ATV/DTV to select the digital TV mode.
2. Press MENU to display the analogue menu, then
press ◀ or ▶ to select
(SETUP).
3. Press
4 times within 5 seconds.
The password is reset to ‘0000’.
IMPORTANT NOTE ON RESETTING THE PASSWORD
We suggest that you remove the following instruction from
the operating instructions to prevent children from reading it.
51Z0231A_ENG.indd 2551Z0231A_ENG.indd 25 9/16/08 3:28:53 PM9/16/08 3:28:53 PM