Operation Manual

32
Playing a disc
This section shows you the basics on how to play a disc.
Basic playback (DVD/VCD/Audio CD)
Preparation
Make sure that the
(Power) switch on the unit is pushed in
(ON). (The (Power) indicator lights up.)
1
Press TV/DVD on the remote control to select the DVD
mode.
2
Place the disc in the
disc slot with the label
side facing forward.
(If the disc has a label.)
Do not place a disc which is unplayable in this unit.•
3
On the TV-screen, “ ” changes to “Reading” and then
playback commences.
A menu screen will appear on the TV screen if the disc
has a menu feature.
Press ▲/▼/◀/▶ to select title, then press ENTER.
Title is selected and play commences.
•
•
Reading
4
Press to end playback.
The unit records the stopped point, depending on the
disc. “
” appears on the screen. Press PLAY ( ) to
resume playback (from the scene point).
If you press again (“ ” appears on the screen.), the
unit will clear the stopped point.
•
•
To start playback in the stop mode
Press PLAY (
).
Note:
If the unit does not operate
properly:
Static electricity, etc., may affect the
player’s operation.
Disconnect the AC power cord once,
then connect it again.
If a disc is inserted during some modes
other than DVD mode, it may switch to
DVD mode and then playback may be
begun automatically.
•
•
51Z0231A_ENG.indd 3251Z0231A_ENG.indd 32 9/16/08 3:28:59 PM9/16/08 3:28:59 PM