Operation Manual

35
Zooming/Locating desired scene
Zooming (DVD/VCD)
This unit will allow you to zoom in the frame image. You can then
make selections by switching the position of the frame.
1
Press ZOOM during playback.
1
The centre part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM 1(x 1.3), 2
(x 1.5) and
3 (x 2.0).
2
Press ▲/▼/◀/▶ to view a different part of the frame.
You may move the frame from the centre position to UP,
DOWN, LEFT or RIGHT direction.
3
In the zoom mode, press ZOOM repeatedly to return to a
1:1 view (
Off).
Note:
You can select the Pause or Slow in the zoom mode.
Some discs may not respond to zoom feature.
Zoom function can be used for DivX
®
CD.
•
•
•
Locating desired scene (DVD/VCD/Audio CD)
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to playback. In the case of VCD/Audio
CD discs, time and track are used to locate the desired point to
playback. To check the title, chapter/track and time, press
.
1
Press JUMP during playback
or resume stop mode.
Time
Title
Chapter
Jump
2
Press ▲ or ▼ to select the
“Title/Track”, “Chapter” or
“Time”.
Time
Title
Chapter
Jump
3
Press Number buttons (0–9)
to input the number.
If you input a wrong number,
press CANCEL.
Refer to the package
supplied with the disc to
check the numbers.
•
•
Time
Title
Chapter 12
Jump
4
Press ENTER. Playback starts.
When you change the title, playback starts from Chapter
1 of the selected title.
Some discs may not work in the above operation.
Note:
In case of the Audio CD and Video-CD, only Track and
Time can be selected.
In case of the Video-CD playback with PBC, the JUMP
does not work. Turn off the PBC (see page 31).
Only Time search function can be used for DivX
®
CD.
•
•
•
•
•
51Z0231A_ENG.indd 3551Z0231A_ENG.indd 35 9/16/08 3:29:02 PM9/16/08 3:29:02 PM