Operation Manual

36
Marking desired scenes
Marking the scenes (DVD/VCD/Audio CD)
The unit stores the points that you want to watch again up to 3
points. You can resume playback from each scene.
1
Press MARKER during
playback.
Marker 2
Marker 1
Marker 3
2
Select the blank Marker using
▲ or ▼.
Then press ENTER at the
desired scene.
Marker 2
Marker 1
Marker 3
2700 54
Repeat this procedure to set the other 2 scenes.•
3
Press MARKER to clear this display.
Returning to the scenes (DVD/VCD/Audio CD)
1
Press MARKER during
playback or stop mode.
Marker 2
Marker 1
Marker 3
2700 54
16
08
25
31
01
02
2
Press ▲ or ▼ to select the
Marker 1-3.
Marker 2
Marker 1
Marker 3
27
16
08
54
25
31
00
01
02
3
Press ENTER.
Playback starts from the marked scene.
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
Note:
Some discs may not work with the
marking operation.
The marking is cancelled when you
eject the disc or turn the power off.
Some subtitles recorded around the
marker may fail to appear.
In case of Video CD with PBC,
Marker function is prohibited.
Marker function does not work with
MP3/JPEG CD/DivX
®
CD.
•
•
•
•
•
51Z0231A_ENG.indd 3651Z0231A_ENG.indd 36 9/16/08 3:29:03 PM9/16/08 3:29:03 PM