Operation Manual

50
Customizing The Function Settings
DRC : Off
QSound : On
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
Menu : English
Subtitle : English
Audio : English
OSD : English
Parental : Off
Password : Change
DivX(R) VOD : Display
Parental
Some discs are specified as not suitable for children. Such discs can be
limited not to playback with the unit.
1) Press ▲ or ▼ to select “Parental”, then press ENTER. “Enter Password”
screen will appear.
2) Press “0000” using Number buttons (0–9). (Please note, this is pre-
setting password of this unit). Then press ENTER. The parental level list
will appear.
Level 1: DVD software for adults cannot be played back.
Level 8: Virtually all DVD software can be played back.
Level Off: The parental control setting does not function.
3) Press ▲ or ▼ to select from the level 1 to level 8. The limitation will be
more severe as the level number is lower. Then press ENTER.
4) Press
to activate Parental control setting.
Note:
If each setup (pages 48 ~ 50) has been completed, the unit can always
work under the same condition (especially with DVD discs).
Each setup will be retained in the memory even if you turn the power off.
Depending on the discs, the unit cannot limit playback.
Some discs may not be encoded with specific rating level information
though its disc jacket says “adult.” For those discs, the age restriction will
not work.
The password is required every time when you change the parental
level.
If you input a wrong number, press CANCEL.
Password
1) Press ▲ or ▼ to select “Password”, then press ENTER. “Enter Current
Password” screen will appear.
2) Press Number buttons (0–9) to input the current password (If the
password has not been set yet after you purchase this unit, it is “0000”).
3) Then press ENTER. “Enter New Password” screen will appear. Press
Number buttons (0–9) to input the new password.
4) Press ENTER. Now your new password has been set. Be sure to
remember this number!
If you forget the password.
1) Press
to remove the disc.
2) While holding 7 down on the remote control and at the same time
press STOP (DVD) on the side panel. “Password Clear” appears on
the screen. Now the password has been returned to the initial value
(“0000”).
DivX
(R)
VOD
In order to play DivX
®
VOD (Video On Demand) content on this unit, you first
need to register the unit with your DivX
®
VOD content provider. You do this by
generating a DivX
®
VOD registration code, which you submit to your provider.
1) Press ▲ or ▼ to select “DivX(R) VOD”. Then press ENTER.
Your 8-character registration code is displayed. Make a note of the code as
you will need it when you register with a DivX
®
VOD provider. Then press
ENTER to select Done.
•
•
•
•
•
51Z0231A_ENG.indd 5051Z0231A_ENG.indd 50 9/16/08 3:29:17 PM9/16/08 3:29:17 PM