Operation Manual

ANT

AV1

AV2

Decoder

(All illustrated SCART cables and antenna cables are not supplied)

Satellite antenna

DVD player

Satellite

receiver

Video recorder

Antenna

TV (Back side view)

DEC

VCR

Connection to other equipment

1. Connecting other units to your TV

Caution. Before connecting:

• Make sure to disconnect the appliance from the power

supply in order to avoid any potential damage from

occurring.

• Make sure to establish the required connection.

• Make sure that connections are properly and correctly

attached before connecting the appliances to the power

supply.

Connect with Satellite receiver as shown below.

Select the TV-Program at the satellite receiver.

To do this, use the remote control of the satellite

receiver. You cannot store the same station once again

additionally in LCD-Monitor which already stored in

satellite receiver.

2. Connecting a DVD player

Note:

S-Video signals can be played back through the AV2 input (see page 57).

To ensure optimum picture quality,

select RGB for the DVD player’s output

signal (see Owner’s manual of the DVD

player). AV1 SCART is compatible with

RGB signal. Select AV1 input mode to

view (see page 11).

DVD Player

(SCART cable, not supplied)

TV (Back side view)

51Z0231A_ENG.indd 5551Z0231A_ENG.indd 55 9/16/08 3:29:20 PM9/16/08 3:29:20 PM