Operation Manual

6. Connecting to a DVD player or other AV device with Component Video outputs

If your DVD player (or other device) has Component Video output jacks, use a suitable set of leads (RCA/

Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance

the picture quality and performance. Please remember that you will also need to connect separate leads

(RCA/Phono) for the audio signals. Select the COMPONENT input mode (see page 11).

YPbPr

Component output Audio output

Video cable (not supplied)

Audio cable (not supplied)

To COMPONENT IN

TV (Back side view)

Note:

The Component Video input of this unit are for use with equipment which outputs interlaced signals (PAL:

576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).

•

DVD player

5. Connecting Video camera and Video recorder

Select the “MONITOR” option in the SETUP menu (see No.7 on page 58).

Select the AV2 input mode (see page 11). You can see the playback picture from video camera.

This signal is output via AV1 and can be recorded by video recorder.

With this arrangement, Video recorder will record exactly what is shown on the screen.

Note:

• If you have a camcorder with

S-video, use an S-video cable

instead of a standard video cable.

Do not connect both a standard

video cable and an S-video cable

at the same time, or the picture

performance will be unacceptable.

• When you input the PAL-M signal

to AV2 input, select AV COLOUR

setting to AUTO, otherwise the

monochrome images will be

displayed.

Video camera to AV2

Playback

TV (Back side view)

(AV cable, not supplied)

(S-VIDEO cable, not supplied)

AV output

Video recorder to AV1

Recording

(SCART cable, not supplied)

Connection to other equipment

51Z0231A_ENG.indd 5751Z0231A_ENG.indd 57 9/16/08 3:29:21 PM9/16/08 3:29:21 PM