Operation Manual

6
Location of controls
Description of Indicators and Controls
1. Remote sensor
2.
(Power) indicator: The LED indicator lights up red in standby mode, orange in standby mode
when the timer is activated, and green in the power ON mode.
3. Loudspeakers
4.
(EJECT): Eject a disc.
5.
(Volume) +/– buttons / In Menu: Setting.
6.
(Channel) /PLAY ( ▶ ) button: Press to change to a higher numbered channel set into
memory. DVD mode : Playback. In Menu: Setting. In Standby: Turning on the unit.
7.
(Channel) /STOP (■) button: Press to change to a lower numbered channel set into
memory. DVD mode : Stop. In Menu: Setting. In Standby: Turning on the unit.
8. MENU button: To display the analogue menu screen.
9.
(INPUT SELECT) button: Select input mode for ATV/DTV/AV1/AV2/COMPONENT/HDMI/PC/
DVD. In Menu : Using as ENTER button.
10.
(Power)-button: Preparation: Connect power-cable to 230V/50Hz.
a) If standby-LED is red, you may power-off. To power-off, press power-button 1x and release.
For confirmation, standby-LED will turn off.
b) If standby-LED is off, you may power-on. To power-on, press power-button 1x and release.
For confirmation, standby-LED will change to red and about 1 second later to green.
c) If the TV is currently working, press power-button 1x and release to power-off.
For confirmation, standby-LED will turn off.
In power-off-condition, the unit cannot be power-on by pressing
on the remote control.
In power-off-condition, the TV’s power-consumption is approx. 1 Watt.
If total disconnection from the mains is required, please unplug.
Disc slot
4
3
12
5
6
8
9
10
7
Illustration of 19DV555DG
Adjusting the angle of the base
You can adjust the angle of the TV-screen
for 3° forward or for 10° backward from
vertical angle.
Hold the base of the TV while adjusting
the angle.
51Z0231A_ENG.indd 651Z0231A_ENG.indd 6 9/16/08 3:28:29 PM9/16/08 3:28:29 PM