Operation Manual

21
Manual Scan/ Carrier Setup
Manual Scan
With the Manual Scan option, you can tune one carrier at a time,
by entering the carrier parameters manually.
1
Press ▲ or ▼ to select ‘Manual Scan’, then press ENTER.
Manual Scan
Auto Scan
Carrier Setup
noitallatsnIunem niaM
ABC
CH1
CH2
CH3
Texd
CI
i
ABC
i
2
You can choose the carrier number from the Channel list by
using ◀ or ▶ and the corresponding frequency set for the
carrier will be set for tuning.
Otherwise you can
also directly enter
the frequency value
to start the tuning.
Manual Scan
Channel list
Ch-21
Frequen
cy (kHz)
474000
Navigate
Enter Exit
0..9
3
After setting the carrier, press ENTER to start the scanning.
During the scan process, the list of services (TV/Radio)
collected for the carrier will be listed.
4
Then the confirmation banner will be displayed.
Press ◀ or ▶ to select ‘Yes’ or ‘No’, then press ENTER.
5
Press EXIT to return to the normal screen.
Note:
If on the ‘AUTO INSTALLATION
(COUNTRY)’ screen ‘FINLAND’ is
selected, ‘Frequency (kHz)’ cannot
be used.
When the Country is set
to FINLAND in the ‘AUTO
INSTALLATION (COUNTRY)’
If there is a Channel List in the data
after Auto Scan or Manual Scan,
Channel Type Selection Menu will
be displayed and available to set
Channel List Type.
Select the Channel List Type by
pressing ◀/▶ and press ENTER
If “FINLAND” is selected on the
“AUTO INSTALLATION (COUNTRY)”
screen, Data is displayed on the
“Carrier Setup” screen.
•
•
•
Carrier Setup
The Carrier setup option menu lists all the carriers (multiplexes)
that are currently available and allows you to Rename, Delete or
Rescan carriers individually.
1
Press ▲ or ▼ to select ‘Carrier Setup’ then press ENTER.
Manual Scan
Auto Scan
Carrier Setup
noitallatsnIunem niaM
ABC
CH1
CH2
CH3
Texd
CI
i
ABC
i
2
All the carriers are listed with their frequency and service
information - the user can scroll through the carrier list and
select each one individually to Rename, Delete or Rescan.
3
Rename:
Select carrier, then press Red button. The alphanumeric
keypad will appear. You can rename a service as per your
preference (see page 23).
Delete:
Select carrier, then press Green button. The check mark
(
) will be displayed for selected carrier. Then press
ENTER. The confirmation banner will be displayed.
Press ◀ or ▶ to select ‘Yes’ or ‘No’, then press ENTER. If
the option ‘Yes’ is selected then all the marked carriers will
be deleted from the list.
Rescan:
Rescan allows to tune the already tuned carrier, to collect
any new programmes that are currently available in the
stream. Press Blue button, to rescan the current selected
carrier.
52R0131A_ENG.indd 2152R0131A_ENG.indd 21 4/3/09 11:08:31 AM4/3/09 11:08:31 AM