Operation Manual

57
5. Connecting to a DVD player or other AV device with Component Video outputs
If your DVD player (or other device) has Component Video output jacks, use a suitable set of leads (RCA/
Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance
the picture quality and performance. Please remember that you will also need to connect separate leads
(RCA/Phono) for the audio signals. Select the COMPONENT input mode (see page 11).
YPbPr
Component output
Audio output
Video cable (not supplied)
Audio cable (not supplied)
To COMPONENT IN
TV (Back side view)
Note:
The Component Video input of this unit are for use with equipment which outputs interlaced signals
(PAL: 576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).
•
DVD player
Connection to other equipment
Information/Status message Cause
Invalid entry The channel does not exist. (e.g., “000“)
No radio services Cannot change to Radio mode because there is no radio service in the
channel list.
No TV services Cannot change to TV mode because there is no TV service in the channel list.
No services There are no services in the received signal.
No subtitles There are no subtitles in the received signal.
No video No audio The signal does not contain audio or video.
Audio stream not available The Multi Audio Menu cannot be displayed because there is no sound.
Descrambling not possible The services for the selected channel are not available for this card.
CI card initialized CI card is initializing.
CAM module has been removed CAM module has been removed. (CAM is used for inserting the CI card.)
Database empty There are no services in the TV.
No signal There are no signal inputs.
Locked service The service is locked with the channel organizer.
Scrambled service The service is scrambled and unavailable.
Digital Service Not available.
Not Running Broadcasting has been suspended.
HD service This service is for HD.
New service added … A new service has been added.
Upgrading available service details Service information has been changed. The channel list is updating.
Duplicate carrier found The same signal has already been set.
Invalid Stream Contains a video format that is not supported by this TV.
Status message
52R0131A_ENG.indd 5752R0131A_ENG.indd 57 4/3/09 11:09:01 AM4/3/09 11:09:01 AM