Operation Manual

16
Stereo reception with the built-in analogue tuner
The built-in Tuner can detect and
receive NICAM stereo broadcasts
automatically.
Note:
In case of bad reception, the stereo
sound also can be disturbed.
•
NICAM stereo sound reception:
1
Select NICAM, then press ENTER.
Press ◀ or ▶ to select AUTO or OFF.
Select OFF if you do not want to
receive NICAM sound.
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND OFF
AUTO
HDMI1 AUDIO HDMI
2
Press EXIT to return to the normal screen.
The following types of broadcast are possible with
NICAM transmissions
‘NICAM ST’ illuminates for approx.
4 seconds when a NICAM STEREO
broadcast signal is received.
‘NICAM M1’ illuminates for approx.
4 seconds when a NICAM MONO A
broadcast signal is received.
‘NICAM M1/M2’ illuminates for
approx. 4 seconds when a NICAM
MONO A and MONO B broadcast
signal is received.
This will be displayed for approx.
4 seconds if a NICAM signal is
received when the ‘NICAM OFF’
option is selected.
Stereo reception in Germany
‘STEREO’ illuminates for approx. 4
seconds when a STEREO broadcast
signal is received.
When 2-channel sound reception is available, you can
select your preferred audio with the AUDIO SELECT
button.
Each time you press AUDIO SELECT, the sound channel will
switch to the alternative channel available.
NICAM 2-channel sound reception (not available in
Germany)
NICAM M1/M2
NICAM M1/M2
2-channel sound reception in Germany
SOUND 1 / 2
SOUND 1 / 2
NICAM M1
NICAM OFF
NICAM M1 / M2
NICAM ST
STEREO
52R0131A_ENG.indd 1652R0131A_ENG.indd 16 4/3/09 11:08:27 AM4/3/09 11:08:27 AM