Operation Manual

24
Display Setup/Time Setup
Display Setup
1
Press ▲ or ▼ to select ‘Display Setup’, then press ENTER.
P
Subtitle
assword Setup
Display Setup
Time Setup
Main menu System Configuration
ABC
CH1
CH2
CH3
Texd
CI
i
ABC
i
2
Display Setup menu will appear.
Press ▲ or ▼ to select the item you want to change.
Then you can change each setting by pressing ◀ or ▶.
Banner
timeout
1 sec, 2 sec.….
7 sec.
Select how long the service
banner information appears on
screen.
Banner
position
Top Select whether the service
banner information appears on
top or bottom of the screen.
Bottom
3
After all the changes are made, press EXIT to return to the
normal screen.
Time Setup
If the time displayed on the Channel banner differs from the
actual time, it can be corrected.
1
Press ▲ or ▼ to select ‘Time Setup’, then press ENTER.
P
Subtitle
assword Setup
Display Setup
Time Setup
Main menu System Configuration
ABC
CH1
CH2
CH3
Texd
CI
i
ABC
i
2
Time Setup menu will appear.
If the time displayed on the Channel banner differs from the
actual time, adjust the time offset with the ◀ or ▶ button
until the correct time is shown.
Note:
Normally, this would be done by selecting “Auto”.•
3
After all the changes are made, press EXIT to return to the
normal screen.
52R0131A_ENG.indd 2452R0131A_ENG.indd 24 4/3/09 11:08:33 AM4/3/09 11:08:33 AM