Operation Manual

32
English
Q
Why don’t the devices connected via
HDMI operate properly?
A
Make sure to use cables with the HDMI
logo (
®
). Some early HDMI
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
Why is the VCR/DVD picture in black
and white?
A
Check the correct input has been cho-
sen: S-VIDEO or AV.
Q
Why did TV turn off by itself?
A
After roughly 15 minutes without any
input video signal at TV mode or 4 hours
without pressing any keys, the TV will
turn off to save power.
Q
Why is the soundtrack in English when
a different audio language has been
selected?
A
The programme is currently being broad-
cast with an English soundtrack only.
Q
Why is a page number visible at the top
of the screen but no text?
A
Text has been selected but Teletext
information is currently unavailable on
the current source.
LED indication
Condition
LED-2 LED-1
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
OFF
Green
(Solid)
Power ON
On Timer is NOT set
OFF
Red
(Solid)
Power OFF (Standby)
On Timer is NOT set
Green
(Solid)
Red
(Solid)
Power OFF (Standby)
On Timer is set
Q
Why are the LEDs on the front of the
television indicate?
A
Check the following table.
LED-2
LED-1