Operation Manual

English
SETTING UP
9

1
2
4
PC/HDMI 1
(AUDIO)
Digital
Audio
RGB/PC
Y L AUDIO
(5) COMPONENT
(1)
(2)
R
(4) COMPONENT
P /C
R R
P /C
B B
Y L AUDIO RP /C
R R
P /C
B B
HDMI 1/2/4
*a decoder could
be Digital Satellite or any
other compatible decoder.
decoder*
media recorder
NOTE:
SCART1 : (INPUT/TV OUT)
SCART2 : (INPUT/TV OUT)
(1)
(2)
AC-IN
NOTE: SCART1 can support Canal+ decoder.

Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or a media
recorder, it is essential that the aerial cable is connected  the aerial socket on the decoder and/
or on the media recorder the TV.

Connect the video recorder  or decoder  socket to the television. Connect the media recorder
 socket to the decoder . socket.
Before running , put your decoder and media recorder to .
The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See page 18.)
SPDIF (Optical Digital Audio Out) When a digital audio signal is associated with the input selected for
viewing, the digital audio will be available on this SPDIF connection to your home theater system.
HDMI
®
(High-Denition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
with digital audio and video output. It is designed for best performance with 1080p high-denition video
signals but will also accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i, 480p, 576i, 576p, and
720p signals.
NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment
may not operate correctly.