Printer User Manual
Table Of Contents
- Preface
- CONTENTS
- OVERVIEW
- PRINTING FROM WINDOWS
- Before Using the Printer Driver
- Printing from an Application
- Setting Up Print Options
- Printing with the Best Functions for Your Needs
- PRINTING FROM MACINTOSH
- PRINTING FROM UNIX/Linux
- MANAGING PRINT JOBS FROM THE CONTROL PANEL
- OTHER PRINTING METHODS
- APPENDIX
- INDEX
2 PRINTING FROM WINDOWS
68 Printing with the Best Functions for Your Needs
Stapling
You can staple sets of paper.
Stapling is not available if a Finisher (optional) is not installed.
Stapling the paper
1
Display the [Finishing] tab menu.
2
Select the [Staple] check box. Select a stapling option.
y The selectable options vary depending on the paper size.
y [Center Double] can be selected only when the Saddle Stitch Finisher (optional) is installed and configured
in the [Configuration] tab.
3
Set any other print options as required and click [OK].
4
Click [OK] or [Print] to send the print job.
The output is stapled for each copy as specified.
Upper Left — Select this option to staple the printed document at the upper left.
Upper Right — Select this option to staple the printed document at the upper right.
Center Top — Select this option to double staple the printed document along the top edge.
Middle Left — Select this option to double staple the printed document along the left side.
Center Double — Select this option to fold and double staple the printed document in the center.