AV61*D* DIGITAL Series
Contents Safety Precautions ....................................... 3 Installation and important information ....... 4 Stable Sound® ....................................23 The remote control ....................................... 5 Audio Description ................................... 23 Inserting batteries and effective range of the remote ................................................. 6 Visually Impaired .................................... 23 Widescreen viewing ..................................
Digital on-screen information and Programme Guide....................................... 34 Information .............................................. 34 Guide ........................................................ 34 EPG Timer................................................ 34 Text services ............................................... 35 Setting the Language ............................. 35 Text Information ...................................... 35 Control buttons .....................................
English SETTING UP Safety Precautions DO be careful with glass panels on equipment. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
SETTING UP Where to install Sturdy tie Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent Hook direct sunlight falling on the screen. Place the TV set on a stable, level surface that can support the weight of the TV. As an additional safety measure you can secure the Top View Side View TV to the level surface or a wall, as shown in the illustration, using a sturdy strap.
English SETTING UP The remote control Simple at-a-glance reference of your remote control.
SETTING UP English Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 42 of this manual.
English SETTING UP Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Connect the power cord into the AC IN socket found at the back of the TV. Model : 19/22 Only *a decoder could be Digital Satellite or any other compatible decoder. AC IN RGB/PC media recorder (1) COMPONENT Y decoder* PB/CB PR/CR L R PC/HDMI (AUDIO) AUDIO HDMI (3) NOTE: SCART can support Canal+ decoder.
SETTING UP English Aerial cables: - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television. SCART leads: - - - - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.
English SETTING UP Connecting an HDMI™ or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.
SETTING UP English Model : 26/32/37 Only 1 HDMI device 2 HDMI 1/2 HDMI out To view the HDMI device video, press to select the mode.
English SETTING UP DVI device to the HDMI Input Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to HDMI1 terminal and audio cables to the PC/HDMI1 Audio socket (see illustration). • The recommended HDMI-to-DVI adapter cable length is 6.6 ft (2m). An HDMI-to-DVI adapter cable transfers video only. • Separate analogue audio cables are required.
SETTING UP English Model : 26/32/37 Only PC/ HDMI 1 (AUDIO) Audio cable for HDMI to television connection (not supplied) 1 2 HDMI 1/2 HDMI-to-DVI adapter cable (not supplied) DVI device NOTE: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.
English SETTING UP Connecting a computer With the HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable and analogue audio cables. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analogue cables are not necessary (see page 9).
SETTING UP English Acceptable Video signals through HDMI terminals Format Resolution V. Frequency H. Frequency Pixel Clock Frequency 480i 720 x 480i 60.000Hz 15.734kHz 27.000MHz 480p 720 x 480p 60.000Hz 31.500kHz 27.000MHz /27.030MHz 576i 720 x 576i 50.000Hz 15.625kHz 27.000MHz 576p 720 x 576p 50.000Hz 31.250kHz 54.000MHz 720p 1280 x 720p 50.000Hz 37.500kHz 74.250MHz 720p 1280 x 720p 59.940 Hz / 60.000Hz 44.960kHz / 45.000kHz 74.170MHz /74.250MHz 1080i 1920 x 1080i 59.
Using the controls Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. Note: COMMON INTERFACE (CI) The common interface is for a Conditional Access Module (CAM) Contact a service provider for details.
SETTING UP English Switching on If the RED LED is unlit check that the mains plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. Using the remote control To set up the television you will now need to use the on screen menus. Press to see the menus.
English TUNING THE TELEVISION 4 Tuning the television To start channel scan press ►. Initial Setup Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 5. Channel Scan First, please connect antenna. If you skip this step, the channel scan can be performed in the TV Menu. Initial Setup 0% Back Connect the television to the main power and press the button.
TUNING THE TELEVISION Setting the programmes NOTE: When Channel Block is activated, the 4-digit password is needed to enter the Channels submenu under SETUP menu. English Select Auto Scan and press . Channels Auto Scan Update Scan Digital Channel Range Scan Analogue Manual Scan Channel Skip Channel Sort Channel Edit Channel Decode Analogue Channel Fine Tune Auto Scan Auto Scan will completely re-tune the television and can be used to update the channel list.
English TUNING THE TELEVISION Press ▼ to highlight Channels and press ► or . In the SETUP menu press ▼ to highlight Channels and press ► or to select.
TUNING THE TELEVISION Channel Sort Search the new channels that are not in the programme list. Change the order of the programme list. Select Channels from the SETUP menu. Press MENU and use ◄ or ► to select SETUP. Highlight Channel Sort and press ► or to select. Press ▼ to highlight Channels and press ► or . Select Update Scan and press scan. Pressing to check two channels to swap the positions. to start Digital Channel Range Scan 1 2 3 4 5 6 7 8 9 10 Scan channels from certain range.
English TUNING THE TELEVISION Reset Default Channel Decode Selecting Reset Default will reset all TV settings to their original factory values, excludes Country, Language OSD, and Channels. Channel Decode support the Canal+ (paid television channel); however, the channel also broadcast some un-encrypted programmes. These programmes without encryption can be viewed free of charge. In the SETUP menu press ▼ to highlight Channels and press ► or to select. Select OK to confirm or select Cancel to exit.
CONTROLS AND FEATURES Quick access menu helps you access some options quickly, such as Picture Mode, Picture Size, Sleep and Favourite List. Press QUICK button to display the Quick access menu and use ▲ or ▼ to select the option. Sound controls Volume Volume Press or to adjust the volume. Sound Mute Quick access Picture Mode Picture Size Sleep Favourite List Press cancel. once to turn the sound off and again to Balance, Bass, Treble Favourite List Press MENU and ◄ or ► to select SOUND.
English CONTROLS AND FEATURES Surround Sound Audio Description This function enriches (expending and deepening) the sound quality. Audio Description is an additional narration during the TV watching. This function enables you to choose the type of narrations. In the SOUND menu press ▼ to select Surround Sound. Press MENU and use ◄ or ► to select SOUND. Using ◄ or ► to switch function On or Off.
CONTROLS AND FEATURES English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Native WIDE This setting is available when watching video signal source via HDMI, and will show the picture without over scan Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.
English CONTROLS AND FEATURES CINEMA 1 When watching letterbox format’ films/ video tapes, this setting will eliminate or reduce the black bars at the top and bottom of the screen by zooming in and selecting the image without distortion. When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed. SUBTITLE SUBTITLE Use this setting when watching a 14:9 broadcast.
CONTROLS AND FEATURES Picture Mode You can adjust the best picture appearance by selecting the preset value in picture mode based on the programme category. Colour Temperature increases the ‘warmth’ or ‘coolness’ of a picture by increasing the red or blue tint. In the PICTURE menu press ▼ to highlight Colour Temperature and press ► or to select. Press MENU and use ◄ or ► to select PICTURE. Press ▼ to highlight Picture Mode and use ◄ or ► to select from Dynamic, Standard, Mild, Movie or User.
English CONTROLS AND FEATURES In the PICTURE menu press ▼ to highlight Advanced Video and press ► to select. You can adjust the skin colour to be more natural. Press ▼ to highlight Cinema Mode, and using ◄ or ► select from On or Off. Advanced Video Cinema Mode On DNR Low CTI Off Flesh Tone Off Adaptive Luma Control Off Active Backlight Off Blue Screen On H.Position V.Position Select RETURN Flesh Tone In the PICTURE menu press ▼ to highlight Advanced Video and press ► or to select.
CONTROLS AND FEATURES English Back Light Timer control Time Zone Adjusting the Back Light can improve the clarity of the screen when viewing. When you select a Time Zone, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. Press MENU and use ◄ or ► to select PICTURE. Press ▼ to highlight Back Light and use ◄ or ► to adjust.
English CONTROLS AND FEATURES If you set the Auto Synchronization Off, you can set the Date and Time manually by using ▲, ▼, ◄ and ►. 4 Sleep Timer The television can be set to turn itself Off after time. Using ▲, ▼, ◄ and ► to select the Power On/Off Timer. Use ▼ to highlight Sleep Timer in the TIMER menu. Use ◄ or ► to set the timer from Off, 10, 20, 30, 40, 50, 60, 90 or 120 Minutes.
CONTROLS AND FEATURES This specifies the type of signal going into SCART on the back of the television. Please refer to the manufacturers instructions for the connected equipment. Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7 for a clear view of the back connection recommendations. In the SETUP menu press ▼ to highlight SCART, then press ► or to select.
English CONTROLS AND FEATURES Logo LED Function control You can set the Logo LED on or off on the bottom of the front panel of your TV. Analogue Subtitle In the FUNCTION menu press ▼ to highlight Logo LED. You can set the subtitle on or off whilst watching TV. Use ◄ or ► to switch the function On or Off. Highlight the Subtitle in the FUNCTION menu, and press ► or to select. NOTE: The Logo LED is for size 32/37 only.
CONTROLS AND FEATURES This function operates according to information from the broadcasting station.Therefore if the signal has no information, this function does not operate. FUNCTION Password * Highlight the Parental in the FUNCTION menu, and press ► or to select. Enter the 4-digit password. RETURN Back EXIT Use ▼ to highlight the Programme Block and press ► or to select. Exit Use ▼ to highlight the Channel Block and press ► or to select.
English CONTROLS AND FEATURES This function can disable the specific external input signals. Highlight the Parental in the FUNCTION menu, and press ► or to select. You can lock the control buttons on your TV by using this Panel Lock. When this function enables, the TV can be controlled only by the remote control. Enter the 4-digit password. Highlight the Parental in the FUNCTION menu, and press ► or to select. Use ▼ to highlight the Input Block and press ► or to select. Enter the 4-digit password.
CONTROLS AND FEATURES Select the on-screen guide by pressing GUIDE, the guide screen will appear highlighting details of the programme and event currently being viewed. This may take a few moments to appear. The on-screen information and programme guide give access to programme details for all available channels. Information Press ◄ or ► for information on other events scheduled for the programme selected.
English TEXT SERVICES Control buttons Text services Below is a guide to the functions of the remote control text buttons. To display the index/initial page: Press to access the index/initial page. The one displayed is dependant on the broadcaster. To reveal concealed text: To discover the solutions on quiz and joke pages press the button. To hold a wanted page: At times it is convenient to hold a page of text. Press and will appear in the top of the screen.
PROBLEM SOLVING English Questions and Answers Below are the answers to some of the most common queries. Q A Q A Q A Q A Q A Q A Q A Q A Q A Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections. Why is there incorrect or no sound when in DTV mode? Press to ensure the hard of hearing option has not been selected.
English PROBLEM SOLVING Q A Q A Does this TV support the DPMS? This is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS. To exit DPMS mode, press button on the remote control to wake up the TV. Why some on-screen information appears some strange symbols? Please make sure your “Country” setting is correct.
IMFORMATION English Specifications and accessories • This television complies with the specification listed below. • Design and specifications are subject to change without notice.
English IMFORMATION DVB is a registered trademark of the DVB Project HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. Printed on recycled paper. 100% Chlorine free. © Toshiba Information Systems (U.K.) Limited All rights reserved. Reproduction in whole or part without written permission is strictly prohibited.
IMFORMATION The software pre-installed in the TOSHIBA Digital Televisions consists of multiple, independent software components. Each software component is copyrighted by TOSHIBA or a third party. The TOSHIBA Digital Televisions uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
English IMFORMATION Exhibit A Portions of this software are copyright © <2007> The FreeType Project (www.freetype.org). All rights reserved Exhibit B ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright © 1995-2006 International Business Machines Corporation and others All rights reserved.
IMFORMATION English Notes For your own records Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states:. Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
