Operation Manual
English
34
CONTROLS AND FEATURES
information and
Programme Guide
The on-screen information and programme guide
give access to programme details for all available
channels.
Information
Press
, the information screen will
appear giving details of the programme
and event currently being viewed.
La 2
Mil Años De Romanico (Las Claves Del Rom
Serie de 25 minutos de duración que no sólo tratará del Románico, desde el
punto de vista arquitectónico, sino que este estilo servirá de hilo conduct
(Carlos Garzón)
11:15 - 11:50 1/2 Spanish Stereo
10+ 576i SD
1/4
11:50 - 12:30 Vive La Via
803
12:41
TTX
STTL
1
2
3
91110 8 7
6
5
4
1 Station
2 Current Programme and Time
3 Parental rating
4 Next Programme and Time
5 Programme description
6 Video format
7 Audio info
8 Subtitle
9 Teletext
10 Audio Description
11 Favourite
Press
again to close the information
screen.
Guide
Select the on-screen guide by pressing
GUIDE, the guide screen will appear
highlighting details of the programme and
event currently being viewed. This may
take a few moments to appear.
Press ◄ or ► for information on other
events scheduled for the programme
selected.
For details of other programmes currently
available, press ▲ and ▼ to scroll up and
down the programme list.
NOTE: In order for the recording operation to
work properly, the media recorder must be set to
the same time as the TV. Regarding the process
for recording, please refer to the owner's manual
of the recording equipment.
EPG Timer
EPG (Electronic Programme Guide) supports 8
sets of timers. You can set or cancel a timer for a
selected programme within the guide. When the
TV is on and the timer activates, a dialogue box is
shown informing you that the programme is about
to start. When the TV is in standby mode and the
timer activates, the TV will wake up with backlight
off, speaker mute on, and change to the channel
selected.
You must set the time correctly before using
this function. All set timers are cleared when
performing a new channel scan.
Press OK button to set/unset Timer in the
selected programme.
The indicator will be shown in the detail
information area if timer function is set.
Press BLUE button to enter the
programme timer list page.
NOTE: Time can be set manually in the Menu/
Timer/Time OSD menu.
After adjustment, the TV clock will not match
the time in the EPG Program Guide. The EPG
Program Guide time follows the broadcast stream
time which can not be adjusted.