TOSHIBA Leading Innovation r,cable ))) or satelliteprovider.
Dear Customer, Thank you for purchasing this Toshiba LCD TV.This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCETHE RiSK OFFiRE OR ELECTRICSHOCK DO NOTEXPOSETHIS APPL ANCETO RA H OR MO STURE WARNING"TO REDUCETHE RiSK OF ELECTRIC SHOCK, DO NOT REMOVECOVER {OR BACK), NO USER.
any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult your doctor. importantSafety instructions 1) Read these instrnctions. 2) 3) Keep these instructions, Heed aiiwarnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean onlywith dry cloth.
24)Toavoid damage tothisproduct, never place orstore theTVindirect sunlight; hot, humid areas; orareas 33) subject toexcessive dust orvibration. 25)Always place theTVonthefloor orasturdy, level, stable surface that can support theweight oftheunit. Tosecure theTV, use asturdy strap from thehook(s) ontherear oftheTVto awall stud, pillar, orother immovable structure. Make sure thestrap istight, secure, and parallel tothefloor. Sturdy strap (as short aspossible) 4" min.
Choosinga location for your LCDTV 40) During normaluse, the TV may makeoccasional snapping or popping sounds.This is normal, especiallywhenthe unit is being turned on or off. If these sounds becomefrequent or continuous, unplug the power cord and contacta ToshibaAuthorized ServiceCenter. To Display yourLCBTV on the included Pedestal Stand: 41) 1) Readand Followthe pedestalassemblyinstructions included with the pedestal.
7) VESA Mounting Pattern 22" TV VESA 19" lOOxlO0 mm M4 22" 100x 1O0 mm M4 26" 200x 1O0 mm M4 32" 200x200 mm Mounting Pattern M6 (mlit in ram) Removingthe Pedestal Stand Four screws 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note; Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
FCCDeclarationof Conformity Compliance StatementtFart15): efficiency, select [Home] mode during initial activation. To return to [Home] mode settings, select [Standardl picture mode. [Standardl mode is recommended for normal home use. The Toshiba19C100U, 19C10U, 22C100U, 22C10U, 26C100U, 26C10U, 32C100U, and 32C10U Televisions comply wkh Part 15 of the FCC rules. ENERGY STAR®qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict guidelines set by the U.S.
important Safety instructions ............................... 3 Installation, Care, and Service ............................. 3 Chapter 1: introduction ...................................... g Features of _our nex_TV ............................................................. 9 Overview of steps fi)r installing, setting tip, and using your new TV ...................................................... 10 TV fi'ont and side panel controls and com_ections....................
Features of your new TV The following features are just of your a few of the many e×citing new Toshiba widescreen, integrated HD, LCD TV: * Integrated digital tuning (SVSB ATSC QAM) eliminates the need for a separate and digital * converter set-top box (in most 1366 x 768 output resolution. . Two HDMF' * interfaces 1080p input support (_:_>page 16). One set of ColorStream _ HD high-resolution * component video inputs (_:_>page 15).
Overview of steps for installing, setting up, and using your new TV Follow these steps to set up your its many exciting features. 1 Carefully read the important TV and begin using safety, care, and service information. for future reference. 2 Observe the following for the TV: ,, Read "Important this manual choosing about (_v page 7). ,, Place the TV on the floor a location your LCD or a sturdy, TV" level, stable surface that can support the weight of the ullit.
TV front and side panel controlsand connections Model 26C100U is used in this manual for illustration purposes. Left side panel TV front Control panel 1 Green LED Power 2 LED(Green) Remote sens0r-- toward this remote effective 3 2 Point range" POWER -- = Power 1 7 CHANNELAV --When no menu is on-screen, these buttons change the channel (programmed channels only; E:_> page 24). 8 VOLUNE411_ -- These buttons adjust the volmne level.
TV back panel connections For an explanation of cable types and connections, see pages 13-19. TVback 3 PowerCord 1 PC IN-- For use when connecting a personal computer. 2 HD[Vl] ®_IN -- High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDM[ device or uncompressed digital video from a DVI device. HDM[ connection is necessary to receive 1080p signals.
Optical audio cane Overview of cable types H Cables can be purclmsed from most stores that sell audio/ video devices. Beibre purchasing any cables, be sure of connector types required by your devices and the length of each cable. Coaxial {F-type) cane (F-type) cable is used for connecting your cable TV service, and/or cable converter box to the ANT/CABLE input with optical audio inputto the TV's DIGITAL AUDIOOUTtermimfl (L:e page 18).
ConnecUnga VCRand antenna, CableTV or Camcorder FromCable TV or antenna FromCableTV Cablebox TV backpanel StereoVCR _ You will need: To view • coaxial cables - standardA/V cables If you have a mono VCR, connect L/MONO on the TV to your VCR's audio out terminal using the white audio cable only.
Connecting a DVD player with ColorStream ® (component video), a VCR, and a sateJJJte receiver From antenna TV back panel Stereo VCR Satellite receiver with component video or DVDplayer with component video You will need: • • To view satellite programs using the component video connections: coaxial cables standardA/V cables - Turn on the satellite receiver.
Connecting an HDNJ®or DVI device to the HDN] input The HDM[ input on your TV receives digital audio and uncompressed digital video from an HDM[ source device, or macompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) wogram material in digital form from ElA/CEA-861-Dcompliant m consumer electronic devices (such as a set-top box or DVD player with HDM[ or DVI output).
RERZA-LINK®connection You can control the basic functions of connected audio/video devices using the TV's remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see pages 48-50. TVbackpanel HDMJ IN '°7_Z _Playback Audioreceiver | device | (REGZA-LINR DVDplayer,etc.} Playbackdevice (REGZfi-LINR DVDplayer,etc.
Connectinoa dioital audio system The TV's DiGiTAL AUDIO OUT terminal outputs a *Dolby _ Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby _ Digital decoder or other external audio system with optical audio input. You will need: + optical audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "mini-optical" connector.
No te: No te: • • The edges of the images may be hidden. • If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080Lor 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (Le. no overscanning). The PC audio input terminals on the TV are shared with the HDMI- 1 analog audio input terminals (_,,_ page 44). Some PC models cannot be connected to this T_ • An adapter is not needed for computers with a compatible mini D-sub 15-pin terminal.
InstaJJin9the remote control batteries 1 Relnove the battery the remote control, cover fi'om the back of Remote controJ effective range For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remote control and the TV. 2 Install two "AAA" size batteries, making sure to match the + and - signs on the batteries to the signs on the battery compartment, 16.
Learning about the remote control The buttons used for operating the TV only are described here. 6 FREEZE freezes the picture. Press again to restore the moving picture (l_' page 36). 7 Channel Numbers (0-9, -/100) directly tune channels. The {_ button is used to tune digital channels (r_' page 33) or to edit the Favorites List (c_y'page 30). 8 FAVBROWSER accesses the Favorites List in the Channel Browel:rxl(_ page 30). 9 RECALLdisplays TV status information (r,,_'page 50).
Main menu Jayout The tables below and on the next page provide a quick overview of your TV's menu system. To open the main menus (illustrated below), press MENU © on the remote control or TV control panel.
Setup/InstaRaUonmenulayout The Installation To open menu contains installation the Setup menu, select Terrestrial the Terrestrial and System Status menus. MENU menu (illustrated Installati0n, and below), press © [nput Configuration + [Opens Channel Program + [Start] Channel Options + [Opens Channel Tuning Mode + Standard Eastern Time Zone Signal on the remote control or TV control panel, open the press @.
initial Setup When you first turn on or reset the TV. the Initial Setup window will appear. 1 [)1 the Menu Languagefield, press 4 or _ to select your preferred language. 2 Configuring the antenna input source for the ANT/CABLEterminal To configure the ANT/CABLE input source: MENU 1 Press O Highlight Press 4 or _ to select Time Zone and set your and open the Setup menu. Installationand press @. desired time zone with 4 or _ and press @. 3 Next, the Location setting window will appear.
No te: o You must configure before programming o Theautomaticchannelprogrammingprocess will erase channels that were previously programmed in the channel memory. While the TV is cycling through the channels, the message "Scanning channels, please wait" appears (as shown above). To cancel channel the remote control into the TV's memory. • To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control.
To create Labe]ino channels 1 A list of common channel labels (logos) for various channels (ABC, CBS, etc.) will be wogrammed into the TV. You will be able to view and assign these logos from the Channel Labeling window. [f the channel Press 3 label: ChannelLabelingwindow. CIt 3 Press or [._ &V_ to select a channel to highlight The software MENU © you want to Cnst0m keyboard and press @. will appear. Preferences menu.
Setting the HDM]®audio mode Viewing the digital signal meter To set the HDMI You can view the digital signal meter in the ANT/ CABLE digital TV input source only. Press audio mode: O and open the Sound menu. MENU 2 Highlight Audio Setup and press @. 3 Press A or V to select HDNI 1 Anfli0 and then press 4 or _ to select the HDM[ 1 audio mode (Ant0, Digital or AnaJ0g). (ARlo is the recommended mode.) See "Connecting an HDM[ or DV[ device to the HDM[ input" (=:_>page 16).
Viewing the system status To view the system MENU © and status: open the Setup menu. 1 Press 2 Highlight 3 A new set of Installation menu icons will appear. Open the System Status menu, highlight System Installati0nand press @. information, and press @. 4 Press 4_ to scroll through the menu bar to select the Factory Defaults or Support informationand view the related information. To close the screen Installation and return to the menu: Highlight DONE and press @.
SelecUngthe video input source to view To select 1 Press _ Press _ EXIT Note: the video input source to view: on the remote control or TV control ° When selecting REGZA-L/NK input sources from the popup window using _, some REGZA -L INK de vices may a utoma tically turn panel. 2 on. And then either: a) Press 0-5; or b) Repeatedly press &IV on the remote control and then press @ to change the input; or c) Repeatedly press _ on the remote control or TV control panel to change the input.
3 Press A or V to highlight want the video source yon Tuning channels to label. Tuningchannelsusingthe Channel Browser TM The Channel Browser TM provides an easy navigation interface for all your channels and inputs. This feature allows you to: 4. Press 4 or _" to select the desired label for that input source.
Elementsof the ChanneIBrowser TM 1 2 3 4 l 5 3 Dess V to highlight or I_"to select Off. HistoryList,and the setting you prefer: Note: History List will be cleared the TV is powered off. 4' 5 Y to highlight press 4 or _ to select Press V to highlight or _ to select Press 7 every time List, and then press On or Off. press 4 On or Off.
To tune to a channel or input in Select mode: SetUngthe ChannelTuningNode Whde watching TV, press _ '_ or _ It, to open the Channel Browser TM and surf back to a previous item or tUrward to the next item in the list. This feature allows you to choose how tuning handled for analog and digital channels when is in Antenna mode.
Tuningto the next programmed channel Switchingbetweentwo channels usingSurfLockTM To tulle to the next programmed channel: Press [cA--']. or [_ on the remote control or TV control panel. The SurfLock TM feature temporarily "memorizes" one CH RTN channel to the 0 button, so you can return to that channel quickly from any other channel by pressing CH RTN .
To select the picture size using the menus: 1 Select Picture Size in the Theater Settings menu. 2 Press 4 or _ to select the desired picture size setting. 3 Highlight [}one and press @. Note: Some of the picture sizes may not be available depending on the receiving signal format (those will be "grayed out" in the Picture Size screen). Using these functions to change the picture size (i.e.
To set the scroll Native {for 480i {HDIVil),480p {HDiVil),720p, lOSOi, and lO8Op signal programs) MENU O settings: 1 Press and open the Picture menu. 2 Highlight Theater Settings and press _. 3 [n the PictureSize field, select either TheaterWide 4' 2 or TheaterWide 3 (you cannot scroll in any other mode). Dess V to highlight the Picture Scroll field.
To turn Press on the auto aspect O and open the MENU ratio feature: Theater Settingsand 2 Highlight 3 [n the Auto Aspect Ratio field, select 0u. 4 To save the new settings, highlight [}oRe and press @. Adjustingthe picture Picture mere*. press _. SelecUngthe picture mode You can select your desired picture settil'Jgs from four different modes, as described below. To revert to the factory defaults, highlight Resetand press @. To turn off the auto aspect Select 0If in step 3 above.
Adjusting the picture quality You can adjust the picture quality (Contrast, Backlight, DynaLight TM, Brightness, Color, Sharpness) to your personal Using the closed caption mode Tint, and F+references.
Digital CCSettings You can customize the closed caption display characteristics by changing the background color, opacity, text size, type, edge, and color. Note: o This feature is avai/ab/e for digita/channe/s onl_ ° You cannot set the Caption Text and Background as the same colon change to another setting will automatically Press MENU O 2 Highlight 3 Press the closed Digital closed caption services default at or V to highlight and press @.
second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program's normal audio. 3 Press A or V to select Audio, and then press 4 or _" to select the desired service. , Adjustingthe audio quaIRy Press EXIT O. Selecting stereo/SAPbroadcasts The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound.
Using the Doihy® DigRal Dynamic Range Control feature Ntnnber buttons to enter a new four-digit enter the code a second time to confirm, code, and press @. This dynamic range control feature causes the ATSC dynamic range to be further compressed, allowing you to switch from ATSC to analog broadcasts at the same dynamic range. To use tile Dolby Digital Dynamic Range Control: Press MENU O and open the Sound menu. Setupand press @. DigitalDynamic RangeControlfield, Compressed.
To block and unblock TV programs and movies: To download (if available): MENU Press O and highlight the Locksmenu i,:on. MENU 1 Press O the additional . rating system . and h@ahght the Locks menu icon. 2 Press Y to display the PIN code entering screen. Press V to display the PIN code entering screen. 3 Enter your four-digit PIN code and press @. 3 4 Press V to highlight Enable Rating Blocking. 4. Press V to highlight Enable Rating Blocking. 5 Press _ to select On,and then press @.
independent rating systemfor broadcasters TV-NA Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) L) Crude or indecent language S) Explicit sexual activity V) Graphic violence TV-14 Parents Strongly Cautioned (This program contains some material that many parents would find unsuitable for children under 14 years of age.
Unlockingprogramstemporarily Usingthe GameTimer ® [f you try to tune the TV to a program that exceeds the rating limits you set, the TV will enter program lock mode and the following message will aF_pear onscreen: You can use the GameTimer playing temporarily To unlock 1 Press ggowI. 2 Enter your four-digit the correct unlock the program to watch. the 1 or PIN code and press @. the program when the TV is turned to lock the video or channels until you unlock the inputs.
5 Press _ to select 0U. When the control panel is locked and any button o13the control panel (except POWER) is pressed, the message "NOT AVAILABLE" appears. Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction. ,i!iiiiiiiiiiii To unlock the control panel: Select 0If in step 5 above, or press and hold the VOLUME- button on the TV control panel for about 10 seconds until the volume icon appears.
NDM! 1 Audio menu setting. /f PC Audio is set to "No," the NDM! 1 Audio setting changes to "Auto." If PC Audio is set to "Yes," the NDM! 1 Audio setting is set to "Digital" and is grayed out in the menu. (Also see item 3 on page 12 and "Setting the HDMI ® Audio mode" on page 27.) Using the Media Player Using the Media Player with USB Toselect the AutoStart function 1 Press m_u and < or b+ to select the Setup menu. 2 Press IP"to select Media Player, and then press @. 3 Select USB, and then press @.
Viewing photo_es There are three types of view modes. Multi 1 To start slideshow, press @ mode. in the Single View 2 Press 4 / _ to view the previous/next photo. View: This view allows you to search for photos in a grid format. These pictures are displayed using thumbnail data in each image file. To set Interval Time and Repeat settings: MENU I Press © to open the Onick Menu. Press IntervalTimeor & or W to select either Repeat.
Duringplayback Photo PAUSE/STEP ,, Press _ to pause. PLAY ,, To resume normal ,, To locate a specific playback, SKIP view) See page 46. Sorting press _. file, press _ Photolist (Multi SKIP To sort or repeatedly. the _b|ders and files MENU I ,, To adjust volume, F,ress ['_ / Note: During playback, menu functions you can adjust the SOUND from the QUICK menu. 3 QuickMenu Press O to open the from Multi View mode. Press A or V to select Press "q or _ to select Sort.
To cancel the Repeatedly press sleep timer: SLEEP Music Nusic list (Multi view) See page 46. Sorting To sort the fMders Press (2) and to open MENU UsingRERZA-LIRR ® files the Quick Menu. 2 Press 3 Press 4 or _ to select or 01fl to set the sorting A or Y to select Sort. Title, New rule.
Note: ° To use this function: _ Set Speaker Preference to Audio Receiver in the REGZA-LINK Setup menu. 3 Press A or V to select the item you want to control and press EN}@. _ Confirm that a connected REGZA-L/NK device (such as DVD player, etc) is selected for the Audio Receiver input soume. ° You can also use this function when the audio receiver is connected to the TV_sDIGITAL AUDIO OUT terminal (not HDMI connection).
2 Press A or V to highlight Enable REGZA-LINK 3 Press < or _ to select On. Note: If you select Enable REGZA-HN!(Off, the other items wi// be grayed out. 4 • Detailed description Press A or V to highlight the REGZA-LJNKSetup item you want to use, and press 4 or _ to select Onor desired mode. * TV Auto [nput Switch: On/Off * TV Auto Power: On/Off * Device Auto Standby: On/Off ° Speaker Preference: TV Speakers/Audio Receiver 5 • Title ®Duration To save the new settings, highlight Done and press @.
Selecting the colortemperature Usingthe advanced picture settings features You can change the quality of the picture by selecting from three preset color temperatures (Cool, Medium, and Warm), as described below. UsingDynamicContrast Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video.
UsingCabieCiear® digital noise reduction The CableClear _''digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc. To change the CableClear settings: Usingthe GameNode feature You can use the Game frame delays 2 in the CableClear field, select your desired setting.
Noisy picture Generaltroubleshooting * Before calling a service technician, please check this chapter for a possible cause of the problem and some in the TV picture . BlacR box on-screen • The closed caption feature is set to one of the Text modes ('1"1,"1"2,"[3, or "1"4). Set the closed caption feature to Off (_:_ page 37).
Soundproblems Closedcaption problems * Check the antenna/cable connections (_:_ Chapter 2). . The station may have broadcast difficulties. Try another channel. . . . . The sound may be muted. Press VOLUME. [f you hear 11o sound, try setting the MTS feature to Stereo mode (_:_ page 39). [f yon are not receiving a second audio program from a known SAP source, make sure the NTS feature is set to SAP mode (_:_ page 39).
ColorStream" Specifications Note: o This model complies with the specifications listed below. o Designs and specifications are subject to change without notice. ° This model may not be compatible with features and/or specifications that may be added in the future.
AcceptaNe signal formats for PC iN and HDN! terminals PC IN signal formats Note: Depending on the connected PC, the following status may occur; incorrect detection, picture position failure, blur, or judde_ But this is not a malfunction VGA 640 x 480 59.940Hz 31.469kHz 25.175MHz SVGA 800 x 600 60.317Hz 37.879kHz 40.000MHz XGA 1024 x 768 60.004Hz 48.363kHz 65.000MHz WXGA 1280 x 768 59.870Hz 47.776kHz 79.500MHz 1360 x 768 60.015Hz 47.712kHz 85.
Limited United States Warranty for LCDTelevisions THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS: This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. Toshiba America Consumer Products, L.L.C. ("TACP') makes the following limited warranties to odginal consumers in the United States.
TOTHE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITEDTO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS LCD TELEVISION). No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever.
h. i. j. Service of a Television on which the TOSHIBA label or logo, rating label or serial nurnber have been defaced or removed; Darnage to the Television caused by failure to follow the specifications, User rnanuals or guides as to usage and/or storage. Firmware updates that are posted to the Toshiba Support website and can be performed by the end user via a USB stick or SD card type rnedia.
shall be and remain valid and enforceable. If and to the extent that any provision of this limited warranty as it relates to any of the Related Parties is found to be invalid or unenforceable in res_)ect of that L_arty _the "Excluded Party') the Excluded Party shall be deemed to be severed or excluded from the provision, and the provision shall remain valid enforceable and applicable in respect of the other or remaininq Related Parties.
TOSHIBA AMERICA PRDDUCTSj CONSUMER L.L.C. Corporate Headquarters: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSH|BA OF CANADA LTD.